fus 11 side panels - when to rivet
Posted: Sun Feb 19, 2012 8:05 pm
Just finished making and preparing all parts for the forward section -
firewall, etc. I have looked through the plans and cannot find mention of
when to rivet fus 11 (side panels) to the cage uprights. The instructions
only mention drilling a top and bottom hole, which was done some time ago. I
would assume that the door hinge attaches here as well, but cant find any
mention of fus 11 in the door installation section.
Looking for help from those ahead of me in the build.
Roland
R56
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
firewall, etc. I have looked through the plans and cannot find mention of
when to rivet fus 11 (side panels) to the cage uprights. The instructions
only mention drilling a top and bottom hole, which was done some time ago. I
would assume that the door hinge attaches here as well, but cant find any
mention of fus 11 in the door installation section.
Looking for help from those ahead of me in the build.
Roland
R56
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------