salvage pictures N5281R
Posted: Sun Feb 19, 2012 6:31 pm
I took a bunch of pictures sunday but could not get them to send tried
another computer still no luck . I think the camera had the wrong settings .
I will try a different camera to day and see if that does not work Wally
----- Original Message -----
From: "Andrew Burr" <verticalperformance@yahoo.com>
To: <rebel-builders@dcsol.com>
S
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
another computer still no luck . I think the camera had the wrong settings .
I will try a different camera to day and see if that does not work Wally
----- Original Message -----
From: "Andrew Burr" <verticalperformance@yahoo.com>
To: <rebel-builders@dcsol.com>
S
Andrew E Burr XIV
Vertical performance LLc
Po Box 213
Cassville MO 65625
VPHelo, LLc has paid for the design and engineering for every component
and holds ownership of all intellectual property for each component.
--- On Thu, 7/29/10, Ron Shannon <rshannon@cruzcom.com> wrote:
From: Ron Shannon <rshannon@cruzcom.com>
Subject: Re: [rebel-builders] Delrin bearings and Crown Silicon lubricant
To: rebel-builders@dcsol.com
Date: Thursday, July 29, 2010, 3:11 PM
I did end up getting a 12-can case of the Crown silicon lube a few months
back -- approx. 11.5 more cans than I need. I still have a few left. If
anyone wants a can for cost + shipping (probably ~ $15 total) let me know.
It does seem to help smooth the action of the Delrin bearings.
Ron
N254MR
On Thu, Jul 29, 2010 at 7:14 AM, Walter Klatt <Walter.Klatt@shaw.ca>
wrote:
Thanks to Ron, I tried it on my elevator and it loosened it up
considerably.
I sprayed some on the inside control column bearings and that helped too.
Now the elevator will actually drop to full forward position just by
gravity. I have never had that. So looks like this stuff does indeed
work.
Wayne knows his plastics, that's for sure.
I should do it to my flaperon ones, too.
Will have to see what happens next time I am up in cold (minus freezing)
weather to see if they don't stiffen up now. During warm weather, like
now
in summer, they were always OK.
Walter
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------