stainless steel
Posted: Sun Feb 19, 2012 6:31 pm
Rob,
It has been stated before but use a cutting fluid, slow speed, and lots of drill pressure when drilling stainless. Do not let the drill spin without cutting! If you do the drill site hardens and you won't like the result.
Ralph Baker
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
It has been stated before but use a cutting fluid, slow speed, and lots of drill pressure when drilling stainless. Do not let the drill spin without cutting! If you do the drill site hardens and you won't like the result.
Ralph Baker
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------