vg's on elevator

[Garry Wright]

Looking for experience with vg's on the elevator for rebels. I have the
landshorter set and I guess the major question is, does anyone have
experience with these on the elevator and what spacing from the hinge
was most effective?

Garry
C-FOKM



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[allen.hewko]

The land shorter vg's need the slight curve sanded flat so they stay glued to
the stab. I used a bench mounted belt sander, it doesn't take much to get
them flat. They should have came with a pattern for the stab, it is a closer
spacing than on the wings. After putting the vg's on the wings I had to put a
set on the stab to get more elevator at slow speeds, but I still don't seem to
have quite enough. I am quite happy with the better performance and control
I got with the land shorter vg's.

Allen
C-FXNS

On 7/18/2010 6:11 PM, wright.garry30@gmail.com wrote to rebel-builders:

-> Looking for experience with vg's on the elevator for rebels. I have the
-> landshorter set and I guess the major question is, does anyone have
-> experience with these on the elevator and what spacing from the hinge
-> was most effective?
->
-> Garry
-> C-FOKM




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------