The Murphy Builders Site

For builders of Murphy Aircraft Manufacturing kits - Bringing builders together
https://www.murphybuilders.net/

[rebel-builders] Strut farings

https://www.murphybuilders.net/viewtopic.php?f=1&t=11060

Page 1 of 1

[rebel-builders] Strut farings

Posted: Sun Feb 19, 2012 6:24 pm
by craig
Did you get any takers on the fairings? I might not use mine; if I don't,
you can have them. Let me know. Craig
----- Original Message -----
From: "Tom Anderson" <n715ta@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Thursday, June 24, 2010 6:14 PM
Subject: [rebel-builders] Strut farings

Do any of you have any extra strut farings? My kit (R259) did not have
any.
Instructions do not give dimensions so I'm having problems making.
Tom





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Strut farings

Posted: Sun Feb 19, 2012 6:30 pm
by Tom Anderson
Craig - thanks for the offer - There hasn't been any offers! So I'd like to
take you up on your offer if you do not use them.
Are they fiberglass or aluminum? My instruction manual doesn't give material
or dimensional specifications so I've been thinking of making a set using
clay to sculpt a smooth transition around the strut bolts then molding a
fiberglass shell.

Having your's would save me a bunch of time, however! Right now I'm
re-building the flaps and ailerons as they were built with standard pop
rivets and I'd like to change to flush rivets so I can fabric cover without
bumps.

Anyway - if you decide to not use your fairings let me know.

Tom Anderson
C77 - 259mr
N743ta@comcast.net


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of craig
Sent: Wednesday, June 30, 2010 2:38 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Strut farings

Did you get any takers on the fairings? I might not use mine; if I don't,
you can have them. Let me know. Craig
----- Original Message -----
From: "Tom Anderson" <n715ta@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Thursday, June 24, 2010 6:14 PM
Subject: [rebel-builders] Strut farings

Do any of you have any extra strut farings? My kit (R259) did not have
any.
Instructions do not give dimensions so I'm having problems making.
Tom





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Strut farings

Posted: Sun Feb 19, 2012 6:30 pm
by snowyrvr@mtaonline.net
I'll see if I can make a decision here soon. Then you won't be hanging.
If nothing else, you could use my set to make yours.

On the flaperon re-rivet: after I built mine, someone told me to CS the
rivets around the leading edge because they'd rub against the rear spar
after they were covered. I cn't tell yet if that'll be an issue. Just a
thought. Craig
Original Message:
-----------------
From: Tom Anderson n715ta@comcast.net
Date: Sun, 4 Jul 2010 09:36:27 -0500
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Strut farings


Craig - thanks for the offer - There hasn't been any offers! So I'd like to
take you up on your offer if you do not use them.
Are they fiberglass or aluminum? My instruction manual doesn't give material
or dimensional specifications so I've been thinking of making a set using
clay to sculpt a smooth transition around the strut bolts then molding a
fiberglass shell.

Having your's would save me a bunch of time, however! Right now I'm
re-building the flaps and ailerons as they were built with standard pop
rivets and I'd like to change to flush rivets so I can fabric cover without
bumps.

Anyway - if you decide to not use your fairings let me know.

Tom Anderson
C77 - 259mr
N743ta@comcast.net


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of craig
Sent: Wednesday, June 30, 2010 2:38 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Strut farings

Did you get any takers on the fairings? I might not use mine; if I don't,
you can have them. Let me know. Craig
----- Original Message -----
From: "Tom Anderson" <n715ta@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Thursday, June 24, 2010 6:14 PM
Subject: [rebel-builders] Strut farings

Do any of you have any extra strut farings? My kit (R259) did not have
any.
Instructions do not give dimensions so I'm having problems making.
Tom





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





--------------------------------------------------------------------
myhosting.com - Premium Microsoft

[rebel-builders] Strut farings

Posted: Sun Feb 19, 2012 6:31 pm
by craig
Hello Tom,

I am not planning on using the fairings. I believe I have all four. If you
want them let me know and give me an address. Craig
----- Original Message -----
From: "Tom Anderson" <n715ta@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Sunday, July 04, 2010 6:36 AM
Subject: RE: [rebel-builders] Strut farings

Craig - thanks for the offer - There hasn't been any offers! So I'd like
to
take you up on your offer if you do not use them.
Are they fiberglass or aluminum? My instruction manual doesn't give
material
or dimensional specifications so I've been thinking of making a set using
clay to sculpt a smooth transition around the strut bolts then molding a
fiberglass shell.

Having your's would save me a bunch of time, however! Right now I'm
re-building the flaps and ailerons as they were built with standard pop
rivets and I'd like to change to flush rivets so I can fabric cover
without
bumps.

Anyway - if you decide to not use your fairings let me know.

Tom Anderson
C77 - 259mr
N743ta@comcast.net


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
craig
Sent: Wednesday, June 30, 2010 2:38 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Strut farings

Did you get any takers on the fairings? I might not use mine; if I don't,
you can have them. Let me know. Craig
----- Original Message -----
From: "Tom Anderson" <n715ta@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Thursday, June 24, 2010 6:14 PM
Subject: [rebel-builders] Strut farings

Do any of you have any extra strut farings? My kit (R259) did not have
any.
Instructions do not give dimensions so I'm having problems making.
Tom





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Strut farings

Posted: Sun Feb 19, 2012 6:31 pm
by Tom Anderson
Craig;
Thanks - let me know what you want for them.
My address is:
715 Waco Way
Poplar Grove, IL 61065
847-809-0037

Tom Anderson

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of craig
Sent: Saturday, August 07, 2010 12:42 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Strut farings

Hello Tom,

I am not planning on using the fairings. I believe I have all four. If you

want them let me know and give me an address. Craig
----- Original Message -----
From: "Tom Anderson" <n715ta@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Sunday, July 04, 2010 6:36 AM
Subject: RE: [rebel-builders] Strut farings

Craig - thanks for the offer - There hasn't been any offers! So I'd like
to
take you up on your offer if you do not use them.
Are they fiberglass or aluminum? My instruction manual doesn't give
material
or dimensional specifications so I've been thinking of making a set using
clay to sculpt a smooth transition around the strut bolts then molding a
fiberglass shell.

Having your's would save me a bunch of time, however! Right now I'm
re-building the flaps and ailerons as they were built with standard pop
rivets and I'd like to change to flush rivets so I can fabric cover
without
bumps.

Anyway - if you decide to not use your fairings let me know.

Tom Anderson
C77 - 259mr
N743ta@comcast.net


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
craig
Sent: Wednesday, June 30, 2010 2:38 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Strut farings

Did you get any takers on the fairings? I might not use mine; if I don't,
you can have them. Let me know. Craig
----- Original Message -----
From: "Tom Anderson" <n715ta@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Thursday, June 24, 2010 6:14 PM
Subject: [rebel-builders] Strut farings

Do any of you have any extra strut farings? My kit (R259) did not have
any.
Instructions do not give dimensions so I'm having problems making.
Tom





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Strut farings

Posted: Sun Feb 19, 2012 6:31 pm
by Charlie Eubanks
Hello Tom
Sounds like you are getting pretty close to flying. I passed your place
while going up to Oshkosh this year. I guess you know Si Smith and his sons?
If you ever get down near St. Louis give me a call and stop by.About to hang
the engine.
Charlie E. 802R
----- Original Message -----
From: "Tom Anderson" <n715ta@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Saturday, August 07, 2010 9:43 PM
Subject: RE: [rebel-builders] Strut farings

Craig;
Thanks - let me know what you want for them.
My address is:
715 Waco Way
Poplar Grove, IL 61065
847-809-0037

Tom Anderson

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
craig
Sent: Saturday, August 07, 2010 12:42 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Strut farings

Hello Tom,

I am not planning on using the fairings. I believe I have all four. If
you

want them let me know and give me an address. Craig
----- Original Message -----
From: "Tom Anderson" <n715ta@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Sunday, July 04, 2010 6:36 AM
Subject: RE: [rebel-builders] Strut farings

Craig - thanks for the offer - There hasn't been any offers! So I'd like
to
take you up on your offer if you do not use them.
Are they fiberglass or aluminum? My instruction manual doesn't give
material
or dimensional specifications so I've been thinking of making a set using
clay to sculpt a smooth transition around the strut bolts then molding a
fiberglass shell.

Having your's would save me a bunch of time, however! Right now I'm
re-building the flaps and ailerons as they were built with standard pop
rivets and I'd like to change to flush rivets so I can fabric cover
without
bumps.

Anyway - if you decide to not use your fairings let me know.

Tom Anderson
C77 - 259mr
N743ta@comcast.net


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
craig
Sent: Wednesday, June 30, 2010 2:38 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Strut farings

Did you get any takers on the fairings? I might not use mine; if I
don't,
you can have them. Let me know. Craig
----- Original Message -----
From: "Tom Anderson" <n715ta@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Thursday, June 24, 2010 6:14 PM
Subject: [rebel-builders] Strut farings

Do any of you have any extra strut farings? My kit (R259) did not have
any.
Instructions do not give dimensions so I'm having problems making.
Tom





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Strut farings

Posted: Sun Feb 19, 2012 8:05 pm
by craig
Haven't forgotten you...just haven't seemed to get them to the post office.
Do you still want them? Craig


----- Original Message -----
From: "Tom Anderson" <n715ta@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Saturday, August 07, 2010 6:43 PM
Subject: RE: [rebel-builders] Strut farings

Craig;
Thanks - let me know what you want for them.
My address is:
715 Waco Way
Poplar Grove, IL 61065
847-809-0037

Tom Anderson

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
craig
Sent: Saturday, August 07, 2010 12:42 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Strut farings

Hello Tom,

I am not planning on using the fairings. I believe I have all four. If
you

want them let me know and give me an address. Craig
----- Original Message -----
From: "Tom Anderson" <n715ta@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Sunday, July 04, 2010 6:36 AM
Subject: RE: [rebel-builders] Strut farings

Craig - thanks for the offer - There hasn't been any offers! So I'd like
to
take you up on your offer if you do not use them.
Are they fiberglass or aluminum? My instruction manual doesn't give
material
or dimensional specifications so I've been thinking of making a set using
clay to sculpt a smooth transition around the strut bolts then molding a
fiberglass shell.

Having your's would save me a bunch of time, however! Right now I'm
re-building the flaps and ailerons as they were built with standard pop
rivets and I'd like to change to flush rivets so I can fabric cover
without
bumps.

Anyway - if you decide to not use your fairings let me know.

Tom Anderson
C77 - 259mr
N743ta@comcast.net


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
craig
Sent: Wednesday, June 30, 2010 2:38 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Strut farings

Did you get any takers on the fairings? I might not use mine; if I
don't,
you can have them. Let me know. Craig
----- Original Message -----
From: "Tom Anderson" <n715ta@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Thursday, June 24, 2010 6:14 PM
Subject: [rebel-builders] Strut farings

Do any of you have any extra strut farings? My kit (R259) did not have
any.
Instructions do not give dimensions so I'm having problems making.
Tom





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
All times are UTC-08:00
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/