The Murphy Builders Site

For builders of Murphy Aircraft Manufacturing kits - Bringing builders together
https://www.murphybuilders.net/

[rebel-builders] prop spacers

https://www.murphybuilders.net/viewtopic.php?f=1&t=10987

Page 1 of 1

[rebel-builders] prop spacers

Posted: Sun Feb 19, 2012 6:23 pm
by Drew Dalgleish
I don't have a spacer on my prop with a piper tri pacer nosebowl. If you
have the speed cowl I think you need one.

At 04:22 PM 03/06/2010 -0400, you wrote:
Hi all



Does the rebel with 0-320 require a spacer to put spinner and prop clear of
the nose bowl, how much of a spacer is needed

Is it possible to push cowl and nose bowl back far enough so a space is not
needed



Cheers



mike
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] prop spacers

Posted: Sun Feb 19, 2012 6:23 pm
by Angus McKenzie
I have an extra 2" prop spacer.



Came with the 80"Borer I bought. I had a machine shop counter-sink all the holes for the prop flange so I would not have to use it. The correct bolt kit was priced at $650 for the 6+" AN bolts




Date: Fri, 4 Jun 2010 00:25:43 -0400
To: rebel-builders@dcsol.com
From: drewjan@cabletv.on.ca
Subject: Re: [rebel-builders] prop spacers

I don't have a spacer on my prop with a piper tri pacer nosebowl. If you
have the speed cowl I think you need one.

At 04:22 PM 03/06/2010 -0400, you wrote:
Hi all



Does the rebel with 0-320 require a spacer to put spinner and prop clear of
the nose bowl, how much of a spacer is needed

Is it possible to push cowl and nose bowl back far enough so a space is not
needed



Cheers



mike
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] prop spacers

Posted: Sun Feb 19, 2012 6:23 pm
by Jones, Michael
So aree you selling the 2" spacer, my prop has 3/8 bolts, how do I know
if your spacer will work ?

Cheers

mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:08 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


I have an extra 2" prop spacer.



Came with the 80"Borer I bought. I had a machine shop counter-sink all
the holes for the prop flange so I would not have to use it. The correct
bolt kit was priced at $650 for the 6+" AN bolts




Date: Fri, 4 Jun 2010 00:25:43 -0400
To: rebel-builders@dcsol.com
From: drewjan@cabletv.on.ca
Subject: Re: [rebel-builders] prop spacers

I don't have a spacer on my prop with a piper tri pacer nosebowl. If
you
have the speed cowl I think you need one.

At 04:22 PM 03/06/2010 -0400, you wrote:
Hi all



Does the rebel with 0-320 require a spacer to put spinner and prop
clear of
the nose bowl, how much of a spacer is needed

Is it possible to push cowl and nose bowl back far enough so a space
is not
needed



Cheers



mike
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] prop spacers

Posted: Sun Feb 19, 2012 6:23 pm
by Angus McKenzie
So yes, I'll sell the 2"spacer. I'll have to go to the hangar (Sun.) and measure the bolt size but I think it's 3/8th's".

Half of AC Spruce price sound OK?
Subject: RE: [rebel-builders] prop spacers
Date: Fri, 4 Jun 2010 08:11:38 -0400
From: Michael.Jones@snclavalin.com
To: rebel-builders@dcsol.com

So aree you selling the 2" spacer, my prop has 3/8 bolts, how do I know
if your spacer will work ?

Cheers

mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:08 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


I have an extra 2" prop spacer.



Came with the 80"Borer I bought. I had a machine shop counter-sink all
the holes for the prop flange so I would not have to use it. The correct
bolt kit was priced at $650 for the 6+" AN bolts




Date: Fri, 4 Jun 2010 00:25:43 -0400
To: rebel-builders@dcsol.com
From: drewjan@cabletv.on.ca
Subject: Re: [rebel-builders] prop spacers

I don't have a spacer on my prop with a piper tri pacer nosebowl. If
you
have the speed cowl I think you need one.

At 04:22 PM 03/06/2010 -0400, you wrote:
Hi all



Does the rebel with 0-320 require a spacer to put spinner and prop
clear of
the nose bowl, how much of a spacer is needed

Is it possible to push cowl and nose bowl back far enough so a space
is not
needed



Cheers



mike
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] prop spacers

Posted: Sun Feb 19, 2012 6:23 pm
by Jones, Michael
Sounds great to me,
what about bolt pattern I have sae2, 3/8 bolts,
When can I pick up,
Contact me at

Michael.jones@snclavalin.com

We can work out the details

cheers


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:22 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


So yes, I'll sell the 2"spacer. I'll have to go to the hangar (Sun.)
and measure the bolt size but I think it's 3/8th's".

Half of AC Spruce price sound OK?
Subject: RE: [rebel-builders] prop spacers
Date: Fri, 4 Jun 2010 08:11:38 -0400
From: Michael.Jones@snclavalin.com
To: rebel-builders@dcsol.com

So aree you selling the 2" spacer, my prop has 3/8 bolts, how do I
know
if your spacer will work ?

Cheers

mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:08 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


I have an extra 2" prop spacer.



Came with the 80"Borer I bought. I had a machine shop counter-sink all
the holes for the prop flange so I would not have to use it. The
correct
bolt kit was priced at $650 for the 6+" AN bolts




Date: Fri, 4 Jun 2010 00:25:43 -0400
To: rebel-builders@dcsol.com
From: drewjan@cabletv.on.ca
Subject: Re: [rebel-builders] prop spacers

I don't have a spacer on my prop with a piper tri pacer nosebowl. If
you
have the speed cowl I think you need one.

At 04:22 PM 03/06/2010 -0400, you wrote:
Hi all



Does the rebel with 0-320 require a spacer to put spinner and prop
clear of
the nose bowl, how much of a spacer is needed

Is it possible to push cowl and nose bowl back far enough so a
space
is not
needed



Cheers



mike
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] prop spacers

Posted: Sun Feb 19, 2012 6:23 pm
by Angus McKenzie
Hi Mike, My engine is 0-320-A2B from and American Champion Challenger GCBC and I'm not certain of the SAE pattern, I think it's 3/8" maybe someone will jump in here and tell us so you'll know before I go to the hangar and check the pattern/size.

I'm in St.Thomas at my hangar Sun morning to fly the Rebel to Reeces Corners for the fly-in, be back mid afternoon.

Can mail it if you want
Subject: RE: [rebel-builders] prop spacers
Date: Fri, 4 Jun 2010 08:26:59 -0400
From: Michael.Jones@snclavalin.com
To: rebel-builders@dcsol.com

Sounds great to me,
what about bolt pattern I have sae2, 3/8 bolts,
When can I pick up,
Contact me at

Michael.jones@snclavalin.com

We can work out the details

cheers


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:22 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


So yes, I'll sell the 2"spacer. I'll have to go to the hangar (Sun.)
and measure the bolt size but I think it's 3/8th's".

Half of AC Spruce price sound OK?
Subject: RE: [rebel-builders] prop spacers
Date: Fri, 4 Jun 2010 08:11:38 -0400
From: Michael.Jones@snclavalin.com
To: rebel-builders@dcsol.com

So aree you selling the 2" spacer, my prop has 3/8 bolts, how do I
know
if your spacer will work ?

Cheers

mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:08 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


I have an extra 2" prop spacer.



Came with the 80"Borer I bought. I had a machine shop counter-sink all
the holes for the prop flange so I would not have to use it. The
correct
bolt kit was priced at $650 for the 6+" AN bolts




Date: Fri, 4 Jun 2010 00:25:43 -0400
To: rebel-builders@dcsol.com
From: drewjan@cabletv.on.ca
Subject: Re: [rebel-builders] prop spacers

I don't have a spacer on my prop with a piper tri pacer nosebowl. If
you
have the speed cowl I think you need one.

At 04:22 PM 03/06/2010 -0400, you wrote:
clear of
space
is not
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] prop spacers

Posted: Sun Feb 19, 2012 6:23 pm
by Jones, Michael
Check the size and let me know if it will fit, my engine is 0-320 b3b
160 hp, 3/8" prop bolts and sae2 flange pattern
If it all works will take it , mailing is fine or can pick up, either
works
Let me know when you have details

cheers

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:41 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


Hi Mike, My engine is 0-320-A2B from and American Champion Challenger
GCBC and I'm not certain of the SAE pattern, I think it's 3/8" maybe
someone will jump in here and tell us so you'll know before I go to the
hangar and check the pattern/size.

I'm in St.Thomas at my hangar Sun morning to fly the Rebel to Reeces
Corners for the fly-in, be back mid afternoon.

Can mail it if you want
Subject: RE: [rebel-builders] prop spacers
Date: Fri, 4 Jun 2010 08:26:59 -0400
From: Michael.Jones@snclavalin.com
To: rebel-builders@dcsol.com

Sounds great to me,
what about bolt pattern I have sae2, 3/8 bolts,
When can I pick up,
Contact me at

Michael.jones@snclavalin.com

We can work out the details

cheers


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:22 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


So yes, I'll sell the 2"spacer. I'll have to go to the hangar (Sun.)
and measure the bolt size but I think it's 3/8th's".

Half of AC Spruce price sound OK?
Subject: RE: [rebel-builders] prop spacers
Date: Fri, 4 Jun 2010 08:11:38 -0400
From: Michael.Jones@snclavalin.com
To: rebel-builders@dcsol.com

So aree you selling the 2" spacer, my prop has 3/8 bolts, how do I
know
if your spacer will work ?

Cheers

mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf
Of
Angus McKenzie
Sent: June 4, 2010 8:08 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


I have an extra 2" prop spacer.



Came with the 80"Borer I bought. I had a machine shop counter-sink
all
the holes for the prop flange so I would not have to use it. The
correct
bolt kit was priced at $650 for the 6+" AN bolts




Date: Fri, 4 Jun 2010 00:25:43 -0400
To: rebel-builders@dcsol.com
From: drewjan@cabletv.on.ca
Subject: Re: [rebel-builders] prop spacers

I don't have a spacer on my prop with a piper tri pacer nosebowl.
If
you
have the speed cowl I think you need one.

At 04:22 PM 03/06/2010 -0400, you wrote:
prop
clear of
space
is not
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
All times are UTC-08:00
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/