[rebel-builders] Rebel Fus 57 Stock Material
Posted: Sun Feb 19, 2012 6:23 pm
Roland,
Depending on the age of the kit, the material your looking for is .125" x
16" x 16" (up to 24"x24") 2024-T3
Cheers,
Jeff
On Fri, May 14, 2010 at 2:33 PM, Roland Kriening <kriening@rogers.com>wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Depending on the age of the kit, the material your looking for is .125" x
16" x 16" (up to 24"x24") 2024-T3
Cheers,
Jeff
On Fri, May 14, 2010 at 2:33 PM, Roland Kriening <kriening@rogers.com>wrote:
Can someone describe Fus 57 stock material to me. Searched through my parts
twice and no sign of it. The plans refer to a "packer" between the top of
the tailspring bulkhead and Fus 31, made from Fus 57 stock.
Roland
R56 (second builder)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------