The Murphy Builders Site

For builders of Murphy Aircraft Manufacturing kits - Bringing builders together
https://www.murphybuilders.net/

[rebel-builders] 0-320/0-360 fin off set

https://www.murphybuilders.net/viewtopic.php?f=1&t=10878

Page 1 of 1

[rebel-builders] 0-320/0-360 fin off set

Posted: Sun Feb 19, 2012 6:19 pm
by Walter Klatt
My fin is offset 3/4 inch as per manual. It flies hands off in cruise, but
needs a little right rudder on full power climb. The 360 requires a little
more right rudder on climb, but otherwise flies exactly the same as my old
320.

Walter

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Simon
Smith
Sent: Saturday, April 10, 2010 6:41 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] 0-320/0-360 fin off set

How much vertical fin off set are the 0-320 and 0-360 lycoming Rebels out
there using?

Si



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] 0-320/0-360 fin off set

Posted: Sun Feb 19, 2012 6:19 pm
by Simon Smith
Thanks Walter do you have the large fin faring?
Si
----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, April 10, 2010 8:45 PM
Subject: RE: [rebel-builders] 0-320/0-360 fin off set

My fin is offset 3/4 inch as per manual. It flies hands off in cruise, but
needs a little right rudder on full power climb. The 360 requires a little
more right rudder on climb, but otherwise flies exactly the same as my old
320.

Walter

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Simon
Smith
Sent: Saturday, April 10, 2010 6:41 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] 0-320/0-360 fin off set

How much vertical fin off set are the 0-320 and 0-360 lycoming Rebels out
there using?

Si



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2802 - Release Date: 04/10/10
06:32:00




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] 0-320/0-360 fin off set

Posted: Sun Feb 19, 2012 6:19 pm
by Walter Klatt
Yes, I have the dorsal fin,... though, wouldn't call it a large one.

Walter

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Simon
Smith
Sent: Saturday, April 10, 2010 7:42 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] 0-320/0-360 fin off set

Thanks Walter do you have the large fin faring?
Si
----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, April 10, 2010 8:45 PM
Subject: RE: [rebel-builders] 0-320/0-360 fin off set

My fin is offset 3/4 inch as per manual. It flies hands off in cruise, but
needs a little right rudder on full power climb. The 360 requires a little
more right rudder on climb, but otherwise flies exactly the same as my old
320.

Walter

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Simon
Smith
Sent: Saturday, April 10, 2010 6:41 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] 0-320/0-360 fin off set

How much vertical fin off set are the 0-320 and 0-360 lycoming Rebels out
there using?

Si



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


----------------------------------------------------------------------------
----



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2802 - Release Date: 04/10/10
06:32:00




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] 0-320/0-360 fin off set

Posted: Sun Feb 19, 2012 6:19 pm
by Roland Kriening
Hi Walter,

I am a couple of days away from installing my dorsal fin. Were there any
printed instructions for the install. If not, any tips?

Roland
R56

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Walter
Klatt
Sent: Saturday, April 10, 2010 11:30 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] 0-320/0-360 fin off set

Yes, I have the dorsal fin,... though, wouldn't call it a large one.

Walter

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Simon
Smith
Sent: Saturday, April 10, 2010 7:42 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] 0-320/0-360 fin off set

Thanks Walter do you have the large fin faring?
Si
----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, April 10, 2010 8:45 PM
Subject: RE: [rebel-builders] 0-320/0-360 fin off set

My fin is offset 3/4 inch as per manual. It flies hands off in cruise, but
needs a little right rudder on full power climb. The 360 requires a little
more right rudder on climb, but otherwise flies exactly the same as my old
320.

Walter

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Simon
Smith
Sent: Saturday, April 10, 2010 6:41 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] 0-320/0-360 fin off set

How much vertical fin off set are the 0-320 and 0-360 lycoming Rebels out
there using?

Si



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


----------------------------------------------------------------------------
----



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2802 - Release Date: 04/10/10
06:32:00




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] 0-320/0-360 fin off set

Posted: Sun Feb 19, 2012 6:19 pm
by Walter Klatt
No instructions, but pretty simple if you can find some pics. Some of the
guys here on the list have some pretty nice documentation on their websites,
so should be some good info available to help you.

Walter

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Roland
Kriening
Sent: Wednesday, April 14, 2010 4:02 AM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] 0-320/0-360 fin off set

Hi Walter,

I am a couple of days away from installing my dorsal fin. Were there any
printed instructions for the install. If not, any tips?

Roland
R56

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Walter
Klatt
Sent: Saturday, April 10, 2010 11:30 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] 0-320/0-360 fin off set

Yes, I have the dorsal fin,... though, wouldn't call it a large one.

Walter

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Simon
Smith
Sent: Saturday, April 10, 2010 7:42 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] 0-320/0-360 fin off set

Thanks Walter do you have the large fin faring?
Si
----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, April 10, 2010 8:45 PM
Subject: RE: [rebel-builders] 0-320/0-360 fin off set

My fin is offset 3/4 inch as per manual. It flies hands off in cruise, but
needs a little right rudder on full power climb. The 360 requires a little
more right rudder on climb, but otherwise flies exactly the same as my old
320.

Walter

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Simon
Smith
Sent: Saturday, April 10, 2010 6:41 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] 0-320/0-360 fin off set

How much vertical fin off set are the 0-320 and 0-360 lycoming Rebels out
there using?

Si



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


----------------------------------------------------------------------------
----



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2802 - Release Date: 04/10/10
06:32:00




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
All times are UTC-08:00
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/