The Murphy Builders Site

I know of one person with an O 360 - parallel valve (190 hp) There are some
IO 360 and IO 375 - parallel valve engines out there (Aero Sport Power) that
are light and have power ratings right up to 210 hp with various
combinations of parts and different compression ratios. Aero Sport Power has
a good website with a section that has all of the specs. Note the
differences in compression ratio and rated RPMs. The IO 360 A series
Lycoming angle valve is a different engine at about 35 pounds heavier, 1/2
inch wider and deeper due to tuned intake manifolds.
All of the above could likely get your Rebel to exeed the the Vne (147 mph)
on wheels at a normal cruise power setting but I am sure that is not what
you want to do!

With that in mind some of the light weight O or IO 360s (parallel valve) on
amphib floats would make a very nice airplane.

Bob 773E

----- Original Message -----
From: "Tyler Coleman" <tylercoleman767@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Thursday, April 08, 2010 9:01 AM
Subject: RE: [rebel-builders] Moose an10-34a wing attach bolt

Just wondering if any one knows of a rebel with an I0-360 or an 0-360 or
mabey an I0-340?

From: oifa@irishfield.on.ca
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Moose an10-34a wing attach bolt
Date: Wed, 7 Apr 2010 20:30:27 -0400

Had to shoot another coat of Polyspray anyhow.. so after I did that, in
the
shop, I went to the hangar.

I don't have any AN10-34a's... but I do have a thousand or more
NAS150-DH58's. They are identical grip/length as the -34's but have an
internal wrenching head.

Send me a direct email if interested.

Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, April 07, 2010 6:59 PM
Subject: Re: [rebel-builders] Moose an10-34a wing attach bolt

I'll look tomorrow Don. I know I had a box of AN10-32's on the bench a
week
back, but I sold them all to a guy restoring a Howard. Can't remember
if I
had a box of -34's but will look in the morning (or later tonight if I
feel
like a wander to the hangar)

Wayne

----- Original Message -----
From: "Don Lipscomb" <dlipscomb@exacteng.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, April 07, 2010 10:44 AM
Subject: Re: [rebel-builders] Moose an10-34a wing attach bolt




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
Hotmail & Messenger are available on your phone. Try now.
http://go.microsoft.com/?linkid=9724461



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------