Sounds like you have a newer Dynon unit. I have the D100 and placed the
static port about halfway down the tail. I read the many notes in the
archives about places that it didn't work very well, but I am really pleased
with my location on the Elite. I thought a lot about where to put it and got
lucky (based on GPS cross checking of airspeed).
Here is a link to my website-in-progress showing the location. You should be
able to determine a similar bulkhead based on the location of the rear
elevator pulley in the picture.
http://www.efogelin.com/aviation/murphy ... G_20080713
_003_large.html
Eric
N645E
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of craig
Sent: Tuesday, April 06, 2010 9:10 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] New Static Location
Has anyone put their static port in the mid to rear tailcone area? I'm
mounting my AHARS for the Dynon in that area and would like to avoid running
both pitot and static back from the front where I'd originally planned them
to be. They both connect to the unit back there. Craig
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
[rebel-builders] New Static Location
[rebel-builders] New Static Location
Thanks, Eric. Why did you put yours in that location and not up front as
most do? Yes, I have the skyview and the magnetometer (ADHAR) unit can't be
installed behind the panel.
----- Original Message -----
From: "Eric Fogelin" <elist@whidbey.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, April 06, 2010 8:22 PM
Subject: RE: [rebel-builders] New Static Location
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
most do? Yes, I have the skyview and the magnetometer (ADHAR) unit can't be
installed behind the panel.
----- Original Message -----
From: "Eric Fogelin" <elist@whidbey.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, April 06, 2010 8:22 PM
Subject: RE: [rebel-builders] New Static Location
Sounds like you have a newer Dynon unit. I have the D100 and placed the
static port about halfway down the tail. I read the many notes in the
archives about places that it didn't work very well, but I am really
pleased
with my location on the Elite. I thought a lot about where to put it and
got
lucky (based on GPS cross checking of airspeed).
Here is a link to my website-in-progress showing the location. You should
be
able to determine a similar bulkhead based on the location of the rear
elevator pulley in the picture.
http://www.efogelin.com/aviation/murphy ... G_20080713
_003_large.html
Eric
N645E
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
craig
Sent: Tuesday, April 06, 2010 9:10 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] New Static Location
Has anyone put their static port in the mid to rear tailcone area? I'm
mounting my AHARS for the Dynon in that area and would like to avoid
running
both pitot and static back from the front where I'd originally planned
them
to be. They both connect to the unit back there. Craig
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] New Static Location
I read in the archives that others have had static side errors when locating
up front that affect airspeed accuracy.
Eric
--------------------------------------------------
From: "craig" <snowyrvr@mtaonline.net>
Sent: Tuesday, April 06, 2010 11:42 PM
To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] New Static Location
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
up front that affect airspeed accuracy.
Eric
--------------------------------------------------
From: "craig" <snowyrvr@mtaonline.net>
Sent: Tuesday, April 06, 2010 11:42 PM
To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] New Static Location
Thanks, Eric. Why did you put yours in that location and not up front
as
most do? Yes, I have the skyview and the magnetometer (ADHAR) unit can't
be
installed behind the panel.
----- Original Message -----
From: "Eric Fogelin" <elist@whidbey.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, April 06, 2010 8:22 PM
Subject: RE: [rebel-builders] New Static Location
Sounds like you have a newer Dynon unit. I have the D100 and placed the
static port about halfway down the tail. I read the many notes in the
archives about places that it didn't work very well, but I am really
pleased
with my location on the Elite. I thought a lot about where to put it and
got
lucky (based on GPS cross checking of airspeed).
Here is a link to my website-in-progress showing the location. You should
be
able to determine a similar bulkhead based on the location of the rear
elevator pulley in the picture.
http://www.efogelin.com/aviation/murphy ... G_20080713
_003_large.html
Eric
N645E
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
craig
Sent: Tuesday, April 06, 2010 9:10 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] New Static Location
Has anyone put their static port in the mid to rear tailcone area? I'm
mounting my AHARS for the Dynon in that area and would like to avoid
running
both pitot and static back from the front where I'd originally planned
them
to be. They both connect to the unit back there. Craig
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] New Static Location
Eric,
I'm interested in the dynon d100 and wanted to see what you had done but could not get onto your web site any clues? also I was on youtube and noticed you flap controls. how did you manage those I like em.
sincerely Tyler C.
_________________________________________________________________
Videos that have everyone talking! Now also in HD!
http://go.microsoft.com/?linkid=9724465
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I'm interested in the dynon d100 and wanted to see what you had done but could not get onto your web site any clues? also I was on youtube and noticed you flap controls. how did you manage those I like em.
sincerely Tyler C.
From: elist@whidbey.com
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] New Static Location
Date: Tue, 6 Apr 2010 21:22:19 -0700
Sounds like you have a newer Dynon unit. I have the D100 and placed the
static port about halfway down the tail. I read the many notes in the
archives about places that it didn't work very well, but I am really pleased
with my location on the Elite. I thought a lot about where to put it and got
lucky (based on GPS cross checking of airspeed).
Here is a link to my website-in-progress showing the location. You should be
able to determine a similar bulkhead based on the location of the rear
elevator pulley in the picture.
http://www.efogelin.com/aviation/murphy ... G_20080713
_003_large.html
Eric
N645E
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of craig
Sent: Tuesday, April 06, 2010 9:10 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] New Static Location
Has anyone put their static port in the mid to rear tailcone area? I'm
mounting my AHARS for the Dynon in that area and would like to avoid running
both pitot and static back from the front where I'd originally planned them
to be. They both connect to the unit back there. Craig
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
_________________________________________________________________
Videos that have everyone talking! Now also in HD!
http://go.microsoft.com/?linkid=9724465
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] New Static Location
His URL wrapped to the next line. If you cut and past the entire URL you should see the picture.
_________________________________________________________________
Got a phone? Get Hotmail & Messenger for mobile!
http://go.microsoft.com/?linkid=9724464
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
From: tylercoleman767@hotmail.com
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] New Static Location
Date: Wed, 7 Apr 2010 07:20:01 -0700
Eric,
I'm interested in the dynon d100 and wanted to see what you had done but could not get onto your web site any clues? also I was on youtube and noticed you flap controls. how did you manage those I like em.
sincerely Tyler C.
_________________________________________________________________From: elist@whidbey.com
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] New Static Location
Date: Tue, 6 Apr 2010 21:22:19 -0700
Sounds like you have a newer Dynon unit. I have the D100 and placed the
static port about halfway down the tail. I read the many notes in the
archives about places that it didn't work very well, but I am really pleased
with my location on the Elite. I thought a lot about where to put it and got
lucky (based on GPS cross checking of airspeed).
Here is a link to my website-in-progress showing the location. You should be
able to determine a similar bulkhead based on the location of the rear
elevator pulley in the picture.
http://www.efogelin.com/aviation/murphy ... G_20080713
_003_large.html
Eric
N645E
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of craig
Sent: Tuesday, April 06, 2010 9:10 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] New Static Location
Has anyone put their static port in the mid to rear tailcone area? I'm
mounting my AHARS for the Dynon in that area and would like to avoid running
both pitot and static back from the front where I'd originally planned them
to be. They both connect to the unit back there. Craig
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Videos that have everyone talking! Now also in HD!
http://go.microsoft.com/?linkid=9724465
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
_________________________________________________________________
Got a phone? Get Hotmail & Messenger for mobile!
http://go.microsoft.com/?linkid=9724464
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] New Static Location
Just as David said, long web addresses wrap and are sometimes cut off.
Follow his steps for rebuilding the link.
This shorter one may work:
http://www.efogelin.com/aviation/murphy/building.htm
You will need to go to the "Panel and Avionics" section and hunt for the
picture of the static port.
The website is not finished and is missing sections like Fuselage.
Now I have more motivation to get the rest of the pictures online. I used so
many others' websites to help me in my building; I'd like to add to the pool
of images.
I'll get to that soon, but even now, there are plenty of images.
Eric
N645E
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of David
Jackson
Sent: Wednesday, April 07, 2010 7:42 AM
To: Rebel Builders
Subject: RE: [rebel-builders] New Static Location
His URL wrapped to the next line. If you cut and past the entire URL you
should see the picture.
noticed you flap controls. how did you manage those I like em.
_________________________________________________________________
Got a phone? Get Hotmail & Messenger for mobile!
http://go.microsoft.com/?linkid=9724464
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Follow his steps for rebuilding the link.
This shorter one may work:
http://www.efogelin.com/aviation/murphy/building.htm
You will need to go to the "Panel and Avionics" section and hunt for the
picture of the static port.
The website is not finished and is missing sections like Fuselage.
Now I have more motivation to get the rest of the pictures online. I used so
many others' websites to help me in my building; I'd like to add to the pool
of images.
I'll get to that soon, but even now, there are plenty of images.
Eric
N645E
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of David
Jackson
Sent: Wednesday, April 07, 2010 7:42 AM
To: Rebel Builders
Subject: RE: [rebel-builders] New Static Location
His URL wrapped to the next line. If you cut and past the entire URL you
should see the picture.
could not get onto your web site any clues? also I was on youtube andFrom: tylercoleman767@hotmail.com
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] New Static Location
Date: Wed, 7 Apr 2010 07:20:01 -0700
Eric,
I'm interested in the dynon d100 and wanted to see what you had done but
noticed you flap controls. how did you manage those I like em.
pleasedsincerely Tyler C.
From: elist@whidbey.com
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] New Static Location
Date: Tue, 6 Apr 2010 21:22:19 -0700
Sounds like you have a newer Dynon unit. I have the D100 and placed the
static port about halfway down the tail. I read the many notes in the
archives about places that it didn't work very well, but I am really
gotwith my location on the Elite. I thought a lot about where to put it and
should belucky (based on GPS cross checking of airspeed).
Here is a link to my website-in-progress showing the location. You
http://www.efogelin.com/aviation/murphy ... G_20080713able to determine a similar bulkhead based on the location of the rear
elevator pulley in the picture.
craig_003_large.html
Eric
N645E
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
runningSent: Tuesday, April 06, 2010 9:10 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] New Static Location
Has anyone put their static port in the mid to rear tailcone area? I'm
mounting my AHARS for the Dynon in that area and would like to avoid
themboth pitot and static back from the front where I'd originally planned
_________________________________________________________________to be. They both connect to the unit back there. Craig
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Videos that have everyone talking! Now also in HD!
http://go.microsoft.com/?linkid=9724465
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
_________________________________________________________________
Got a phone? Get Hotmail & Messenger for mobile!
http://go.microsoft.com/?linkid=9724464
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] New Static Location
I'm on your site right now, Eric. These are great pictures. You do nice
work! I wish I'd seen them sooner. I wonder how many others are out there
waiting to be found? BTW, I did find the static location photo. I think I
will probably give that a go.
Craig #207 or 90% done, 99% to go, or "frustrated in Alaska". lol
----- Original Message -----
From: "Eric Fogelin" <elist@whidbey.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, April 07, 2010 8:15 PM
Subject: RE: [rebel-builders] New Static Location
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
work! I wish I'd seen them sooner. I wonder how many others are out there
waiting to be found? BTW, I did find the static location photo. I think I
will probably give that a go.
Craig #207 or 90% done, 99% to go, or "frustrated in Alaska". lol
----- Original Message -----
From: "Eric Fogelin" <elist@whidbey.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, April 07, 2010 8:15 PM
Subject: RE: [rebel-builders] New Static Location
Just as David said, long web addresses wrap and are sometimes cut off.
Follow his steps for rebuilding the link.
This shorter one may work:
http://www.efogelin.com/aviation/murphy/building.htm
You will need to go to the "Panel and Avionics" section and hunt for the
picture of the static port.
The website is not finished and is missing sections like Fuselage.
Now I have more motivation to get the rest of the pictures online. I used
so
many others' websites to help me in my building; I'd like to add to the
pool
of images.
I'll get to that soon, but even now, there are plenty of images.
Eric
N645E
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
David
Jackson
Sent: Wednesday, April 07, 2010 7:42 AM
To: Rebel Builders
Subject: RE: [rebel-builders] New Static Location
His URL wrapped to the next line. If you cut and past the entire URL you
should see the picture.
could not get onto your web site any clues? also I was on youtube andFrom: tylercoleman767@hotmail.com
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] New Static Location
Date: Wed, 7 Apr 2010 07:20:01 -0700
Eric,
I'm interested in the dynon d100 and wanted to see what you had done but
noticed you flap controls. how did you manage those I like em.pleasedsincerely Tyler C.
From: elist@whidbey.com
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] New Static Location
Date: Tue, 6 Apr 2010 21:22:19 -0700
Sounds like you have a newer Dynon unit. I have the D100 and placed the
static port about halfway down the tail. I read the many notes in the
archives about places that it didn't work very well, but I am reallygotwith my location on the Elite. I thought a lot about where to put it
andshould belucky (based on GPS cross checking of airspeed).
Here is a link to my website-in-progress showing the location. Youhttp://www.efogelin.com/aviation/murphy ... G_20080713able to determine a similar bulkhead based on the location of the rear
elevator pulley in the picture.
craig_003_large.html
Eric
N645E
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf OfrunningSent: Tuesday, April 06, 2010 9:10 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] New Static Location
Has anyone put their static port in the mid to rear tailcone area? I'm
mounting my AHARS for the Dynon in that area and would like to avoidthemboth pitot and static back from the front where I'd originally planned__________________________________________________________________________________________________________________________________to be. They both connect to the unit back there. Craig
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Videos that have everyone talking! Now also in HD!
http://go.microsoft.com/?linkid=9724465
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Got a phone? Get Hotmail & Messenger for mobile!
http://go.microsoft.com/?linkid=9724464
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------