cable guide rivets
Posted: Sun Feb 19, 2012 6:19 pm
The manual (Ch.20, p. 39) says to attach the RG-1 cable guides with RR-7408
alum. rivets. Is that correct? The RR-7408's I have are 5/8", which seems
too long. It looks like the max. grip required anywhere would be at most
half that or less, or 1/4" - 5/16". They appear to have aluminum mandrels,
so maybe the sleeve is extra soft too, and will compress a lot?
Ron
254R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
alum. rivets. Is that correct? The RR-7408's I have are 5/8", which seems
too long. It looks like the max. grip required anywhere would be at most
half that or less, or 1/4" - 5/16". They appear to have aluminum mandrels,
so maybe the sleeve is extra soft too, and will compress a lot?
Ron
254R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------