[rebel-builders] Float Attach Install
Posted: Sun Feb 19, 2012 6:03 pm
Hi Roland
Search for Wayne's posts on the attach brackets. He recommends bolting
some reinforcements inside the bulkhead such that they cover the cutout
in the bulkhead above the attach brackets. This is to avoid eventual
skin wrinkling at the cutout.
Ken
Roland Kriening wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Search for Wayne's posts on the attach brackets. He recommends bolting
some reinforcements inside the bulkhead such that they cover the cutout
in the bulkhead above the attach brackets. This is to avoid eventual
skin wrinkling at the cutout.
Ken
Roland Kriening wrote:
I am about to install my rear float attach brackets. I noticed the pics on
the site (modifications) showing AN bolts used instead of the rivets as
indicated on the plans. Also it looks like there is a extra doubler added to
the bulkhead as well, but I cant be sure. Can anyone tell me what the best
install method is here? I believe Wayne posted the original pics in the mods
section.
Roland
R56
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------