The Murphy Builders Site

Posted: **Sun Feb 19, 2012 5:58 pm**

That's correct, Keith.

Ron
254R

On Wed, Jan 20, 2010 at 9:59 PM, <kpierson@dcsol.com> wrote:

I can't find anything in the manual for the size of the bolts used
to mount the wing to the fus.
The front bolt on my Rebel is 3/8" where as the rear one is 1/4".
That seems to me to be to small, or is that the size that is used
on the rear?

Keith P. 318R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 5:58 pm**

Ron: Thanks for the info.
I suspected that a 1/4" bolt is adequate, but I just wanted to
make sure.

Keith P.

On 1/20/2010 9:07 PM, rshannon@cruzcom.com wrote to rebel-builders:

-> That's correct, Keith.
->
-> Ron
-> 254R
->
->
-> On Wed, Jan 20, 2010 at 9:59 PM, <kpierson@dcsol.com> wrote:
->
-> > I can't find anything in the manual for the size of the bolts used
-> > to mount the wing to the fus.
-> > The front bolt on my Rebel is 3/8" where as the rear one is 1/4".
-> > That seems to me to be to small, or is that the size that is used
-> > on the rear?
-> >
-> > Keith P. 318R
-> >
-> >
->

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 5:58 pm**

Hi everyone,

I am looking to *purchase* a manual( copy) or a CD showing the assembly
procedure for MAM' s1800 Amphibian floats.

I have contacted MAM and they are not willing to sell the CD to me as I have
not purchased a set of floats from MAM.

Any help is much appreciated

cheers

Hans

640E

On Wed, Jan 20, 2010 at 9:59 PM, <kpierson@dcsol.com> wrote:

I can't find anything in the manual for the size of the bolts used
to mount the wing to the fus.
The front bolt on my Rebel is 3/8" where as the rear one is 1/4".
That seems to me to be to small, or is that the size that is used
on the rear?

Keith P. 318R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 5:58 pm**

Contact Wayne O'Shea he has a very good assembly CD.

Si
----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, January 22, 2010 9:12 AM
Subject: Re: [rebel-builders] Wing mounting bolts

Hi everyone,

I am looking to *purchase* a manual( copy) or a CD showing the assembly
procedure for MAM' s1800 Amphibian floats.

I have contacted MAM and they are not willing to sell the CD to me as I
have
not purchased a set of floats from MAM.

Any help is much appreciated

cheers

Hans

640E

On Wed, Jan 20, 2010 at 9:59 PM, <kpierson@dcsol.com> wrote:

I can't find anything in the manual for the size of the bolts used
to mount the wing to the fus.
The front bolt on my Rebel is 3/8" where as the rear one is 1/4".
That seems to me to be to small, or is that the size that is used
on the rear?

Keith P. 318R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--------------------------------------------------------------------------------

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.432 / Virus Database: 271.1.1/2638 - Release Date: 01/22/10
07:34:00

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 5:58 pm**

I didn't buy my kit from MAM but they sold me a manual. ????

I just don't understand the Canadian business model.

Original Message:
-----------------
From: Simon Smith siks@ticon.net
Date: Fri, 22 Jan 2010 09:46:43 -0600
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Wing mounting bolts

Contact Wayne O'Shea he has a very good assembly CD.

Si
----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, January 22, 2010 9:12 AM
Subject: Re: [rebel-builders] Wing mounting bolts

Hi everyone,

I am looking to *purchase* a manual( copy) or a CD showing the assembly
procedure for MAM' s1800 Amphibian floats.

I have contacted MAM and they are not willing to sell the CD to me as I
have
not purchased a set of floats from MAM.

Any help is much appreciated

cheers

Hans

640E

On Wed, Jan 20, 2010 at 9:59 PM, <kpierson@dcsol.com> wrote:

I can't find anything in the manual for the size of the bolts used
to mount the wing to the fus.
The front bolt on my Rebel is 3/8" where as the rear one is 1/4".
That seems to me to be to small, or is that the size that is used
on the rear?

Keith P. 318R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

----------------------------------------------------------------------------
----

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.432 / Virus Database: 271.1.1/2638 - Release Date: 01/22/10
07:34:00

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--------------------------------------------------------------------
mail2web.com

Posted: **Sun Feb 19, 2012 5:58 pm**

could you make me a copy and mail it to me????
Hans
640E

On Fri, Jan 22, 2010 at 9:28 AM, snowyrvr@mtaonline.net <
snowyrvr@mtaonline.net> wrote:

I didn't buy my kit from MAM but they sold me a manual. ????

I just don't understand the Canadian business model.

Original Message:
-----------------
From: Simon Smith siks@ticon.net
Date: Fri, 22 Jan 2010 09:46:43 -0600
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Wing mounting bolts

Contact Wayne O'Shea he has a very good assembly CD.

Si
----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, January 22, 2010 9:12 AM
Subject: Re: [rebel-builders] Wing mounting bolts

Hi everyone,

I am looking to *purchase* a manual( copy) or a CD showing the assembly
procedure for MAM' s1800 Amphibian floats.

I have contacted MAM and they are not willing to sell the CD to me as I
have
not purchased a set of floats from MAM.

Any help is much appreciated

cheers

Hans

640E

On Wed, Jan 20, 2010 at 9:59 PM, <kpierson@dcsol.com> wrote:

I can't find anything in the manual for the size of the bolts used
to mount the wing to the fus.
The front bolt on my Rebel is 3/8" where as the rear one is 1/4".
That seems to me to be to small, or is that the size that is used
on the rear?

Keith P. 318R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

----------------------------------------------------------------------------
----

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.432 / Virus Database: 271.1.1/2638 - Release Date: 01/22/10
07:34:00

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--------------------------------------------------------------------
mail2web.com

Posted: **Sun Feb 19, 2012 5:58 pm**

Hans, I may have misled you; I don't have a float manual. What I was saying
was when I needed the plane manual, I bought it from MAM. Sorry if this is
the case. Craig

----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, January 22, 2010 10:32 AM
Subject: Re: [rebel-builders] Wing mounting bolts

could you make me a copy and mail it to me????
Hans
640E

On Fri, Jan 22, 2010 at 9:28 AM, snowyrvr@mtaonline.net <
snowyrvr@mtaonline.net> wrote:

I didn't buy my kit from MAM but they sold me a manual. ????

I just don't understand the Canadian business model.

Original Message:
-----------------
From: Simon Smith siks@ticon.net
Date: Fri, 22 Jan 2010 09:46:43 -0600
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Wing mounting bolts

Contact Wayne O'Shea he has a very good assembly CD.

Si
----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, January 22, 2010 9:12 AM
Subject: Re: [rebel-builders] Wing mounting bolts

Hi everyone,

I am looking to *purchase* a manual( copy) or a CD showing the assembly
procedure for MAM' s1800 Amphibian floats.

I have contacted MAM and they are not willing to sell the CD to me as I
have
not purchased a set of floats from MAM.

Any help is much appreciated

cheers

Hans

640E

On Wed, Jan 20, 2010 at 9:59 PM, <kpierson@dcsol.com> wrote:
--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

----------------------------------------------------------------------------
----

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.432 / Virus Database: 271.1.1/2638 - Release Date: 01/22/10
07:34:00

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--------------------------------------------------------------------
mail2web.com - What can On Demand Business Solutions do for you?
http://link.mail2web.com/Business/SharePoint

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 5:58 pm**

Hans,

We bought the build CD from Wayne. It's definitely worth the $. Made
life a lot easier. Hard to get the job done with the Murphy CD.

Jason and Rebecca

On 22-Jan-10, at 2:32 PM, Hans Kuck wrote:

could you make me a copy and mail it to me????
Hans
640E

On Fri, Jan 22, 2010 at 9:28 AM, snowyrvr@mtaonline.net <
snowyrvr@mtaonline.net> wrote:

I didn't buy my kit from MAM but they sold me a manual. ????

I just don't understand the Canadian business model.

Original Message:
-----------------
From: Simon Smith siks@ticon.net
Date: Fri, 22 Jan 2010 09:46:43 -0600
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Wing mounting bolts

Contact Wayne O'Shea he has a very good assembly CD.

Si
----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, January 22, 2010 9:12 AM
Subject: Re: [rebel-builders] Wing mounting bolts

Hi everyone,

I am looking to *purchase* a manual( copy) or a CD showing the
assembly
procedure for MAM' s1800 Amphibian floats.

I have contacted MAM and they are not willing to sell the CD to me
as I
have
not purchased a set of floats from MAM.

Any help is much appreciated

cheers

Hans

640E

On Wed, Jan 20, 2010 at 9:59 PM, <kpierson@dcsol.com> wrote:
--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

----------------------------------------------------------------------------
----

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.432 / Virus Database: 271.1.1/2638 - Release Date:
01/22/10
07:34:00

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--------------------------------------------------------------------
mail2web.com

Posted: **Sun Feb 19, 2012 5:58 pm**

Thanks in any case.
Hans 640E

On Fri, Jan 22, 2010 at 1:01 PM, craig <snowyrvr@mtaonline.net> wrote:

Hans, I may have misled you; I don't have a float manual. What I was
saying
was when I needed the plane manual, I bought it from MAM. Sorry if this is
the case. Craig

----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, January 22, 2010 10:32 AM
Subject: Re: [rebel-builders] Wing mounting bolts

could you make me a copy and mail it to me????
Hans
640E

On Fri, Jan 22, 2010 at 9:28 AM, snowyrvr@mtaonline.net <
snowyrvr@mtaonline.net> wrote:

I didn't buy my kit from MAM but they sold me a manual. ????

I just don't understand the Canadian business model.

Original Message:
-----------------
From: Simon Smith siks@ticon.net
Date: Fri, 22 Jan 2010 09:46:43 -0600
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Wing mounting bolts

Contact Wayne O'Shea he has a very good assembly CD.

Si
----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, January 22, 2010 9:12 AM
Subject: Re: [rebel-builders] Wing mounting bolts

assembly
I

----------------------------------------------------------------------------
----

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.432 / Virus Database: 271.1.1/2638 - Release Date: 01/22/10
07:34:00

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--------------------------------------------------------------------
mail2web.com - What can On Demand Business Solutions do for you?
http://link.mail2web.com/Business/SharePoint

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 5:58 pm**

I have Wayne's CD but wanted to have a look at the Murphy CD as well. I may
be able to purchase a beat up set of MAM 1800 amphibian floats

that would have to be disassambled and rebuild.

The MAM CD/Manual would be of some help.

Thanks

Hans
640E

On Sat, Jan 23, 2010 at 8:21 AM, Rebecca Brownell <
brownell@cottagecountry.net> wrote:

Hans,

We bought the build CD from Wayne. It's definitely worth the $. Made
life a lot easier. Hard to get the job done with the Murphy CD.

Jason and Rebecca

On 22-Jan-10, at 2:32 PM, Hans Kuck wrote:

could you make me a copy and mail it to me????
Hans
640E

On Fri, Jan 22, 2010 at 9:28 AM, snowyrvr@mtaonline.net <
snowyrvr@mtaonline.net> wrote:

I didn't buy my kit from MAM but they sold me a manual. ????

I just don't understand the Canadian business model.

Original Message:
-----------------
From: Simon Smith siks@ticon.net
Date: Fri, 22 Jan 2010 09:46:43 -0600
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Wing mounting bolts

Contact Wayne O'Shea he has a very good assembly CD.

Si
----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, January 22, 2010 9:12 AM
Subject: Re: [rebel-builders] Wing mounting bolts

----------------------------------------------------------------------------

----

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.432 / Virus Database: 271.1.1/2638 - Release Date:
01/22/10
07:34:00

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--------------------------------------------------------------------
mail2web.com