The Murphy Builders Site

I have 32 little bulkhead or rib looking parts that come in with the
floats.They are a triangle shape top flanges are about 6",bottom ones
a little less.There is 3 tooling holes and 6 # 40 holes in each.No
part #'s.They don't go on the floats that I can see.Any guesses?
Jason
817R

At 06:31 PM 17/01/2010 -0500, you wrote:

I have 32 little bulkhead or rib looking parts that come in with the
floats.They are a triangle shape top flanges are about 6",bottom ones
a little less.There is 3 tooling holes and 6 # 40 holes in each.No
part #'s.They don't go on the floats that I can see.Any guesses?
Jason
817R

Is the angle the same as the foat bottoms? There was a service
bulletin
from MAM or a strong suggestion from Wayne. I forget which, that all
the
bulkheads and half bulkheads need a doubler at the keel in the step
area.
If it makes you feel better I have a box of mystery parts from my
float
built as well and the floats seem to be working OK.
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Thought of that.No they aren't even close.They have to be for
something else.It's not really important but my curiosity is killing me.
Jason
On 18-Jan-10, at 2:03 PM, Drew Dalgleish wrote:

At 06:31 PM 17/01/2010 -0500, you wrote:

I have 32 little bulkhead or rib looking parts that come in with the
floats.They are a triangle shape top flanges are about 6",bottom ones
a little less.There is 3 tooling holes and 6 # 40 holes in each.No
part #'s.They don't go on the floats that I can see.Any guesses?
Jason
817R

Is the angle the same as the foat bottoms? There was a service
bulletin
from MAM or a strong suggestion from Wayne. I forget which, that all
the
bulkheads and half bulkheads need a doubler at the keel in the step
area.
If it makes you feel better I have a box of mystery parts from my
float
built as well and the floats seem to be working OK.
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Can ya take a picture and email it to me?? ;O)

----- Original Message -----
From: "Rebecca Brownell" <brownell@cottagecountry.net>
To: <rebel-builders@dcsol.com>
Sent: Monday, January 18, 2010 8:00 PM
Subject: Re: [rebel-builders] mystery bulkheads/ribs?

Thought of that.No they aren't even close.They have to be for
something else.It's not really important but my curiosity is
killing me.
Jason
On 18-Jan-10, at 2:03 PM, Drew Dalgleish wrote:

At 06:31 PM 17/01/2010 -0500, you wrote: Is the angle the same as the foat bottoms? There was a service
bulletin
from MAM or a strong suggestion from Wayne. I forget which, that all
the
bulkheads and half bulkheads need a doubler at the keel in the step
area.
If it makes you feel better I have a box of mystery parts from my
float
built as well and the floats seem to be working OK.
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------