Moose QB Stabilizer tip rib bracket
Posted: Sun Feb 19, 2012 5:50 pm
Hi Guys,
Question on the moose stabilizer hinge doubler. I just uploaded a picture
of the tip rib on my QB (2006) moose stab. In the manual, the part in
question is ST1008. In the manual, and in the service bulletin dated 11/04,
the part has 28 rivets in it. Mine only has twelve rivets and is about an
inch shorter than the one described in the manual and SB.
Also, there are 3 pictures in section SR-Moose (101) named:
stabmod1 - Official MAM Stab Hinge reinforce - 1
stabmod2 - Official MAM Stab Hinge reinforce - 2
stabmod3 - Official MAM Stab Hinge reinforce - 3
These pictures show an entirely different mod than what is in the SB and
what is on my stab.
So many options! ;-) What do you guys recommend?
Thanks,
Fred
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Question on the moose stabilizer hinge doubler. I just uploaded a picture
of the tip rib on my QB (2006) moose stab. In the manual, the part in
question is ST1008. In the manual, and in the service bulletin dated 11/04,
the part has 28 rivets in it. Mine only has twelve rivets and is about an
inch shorter than the one described in the manual and SB.
Also, there are 3 pictures in section SR-Moose (101) named:
stabmod1 - Official MAM Stab Hinge reinforce - 1
stabmod2 - Official MAM Stab Hinge reinforce - 2
stabmod3 - Official MAM Stab Hinge reinforce - 3
These pictures show an entirely different mod than what is in the SB and
what is on my stab.
So many options! ;-) What do you guys recommend?
Thanks,
Fred
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------