[rebel-builders] control cable thimble
Posted: Sun Feb 19, 2012 5:49 pm
I'm at a lose as to why this was directed to me??.. and not the Moose
builders/fliers in general.
----- Original Message -----
From: "Mike Davis" <mike.davis@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, December 09, 2009 4:07 PM
Subject: [rebel-builders] control cable thimble
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
builders/fliers in general.
----- Original Message -----
From: "Mike Davis" <mike.davis@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, December 09, 2009 4:07 PM
Subject: [rebel-builders] control cable thimble
Wayne G O'shea
Wayne, on the elevator control cables (moose) murphy used a machined
grooved steel insert inside the thimble for the elevator. Insert rotates
in the thimble .I would use this if it wasn't hid. this is a perfect
setup for rust corrosion and seizure and rotation on the bolt .I know its
there but if someone acquires the aircraft they don't. What did you change
this to .
thanks
Doug Wilson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------