Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] 1500 floats

Converted from Wildcat! database. (read only)
Locked
Hank & Vickie Balch

[rebel-builders] 1500 floats

Post by Hank & Vickie Balch » Sun Feb 19, 2012 5:49 pm

HB

I don't have any answers to your questions, but I own Rebel 307 and I
thought it was interesting that you owned 308. I live in Hendersonville,
NC.

Hank Balch

On Sat, Dec 5, 2009 at 8:05 AM, Hjalmar Bardslokken <
bardslokkenh@videotron.ca> wrote:
Hello everyone,
My name is Hjalmar Bardslokken and I live in Quebec City.I've owned Rebel
308 ul since 2001.Before anyone starts guessing ,the name is Norwegian but I
was born in Canada.I bought myself a non finished Murphy 1500 float kit.
there are a few things missing.One being a CAD drawing of the floats,two
there was no bumpers and three no rigging. I do have the spreader bars. Does
anyone have a file you could send me of the Cad drawing? I sent an e-mail to
MAM about the bumpers NO ANSWER.
Also is there any particular reason people install the float cups on the
side of the floats instead of the top?

Thanks in advance for your help

HB




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Wayne G. O'Shea

[rebel-builders] 1500 floats

Post by Wayne G. O'Shea » Sun Feb 19, 2012 5:49 pm

Hjalmar... The only CAD drawing of the (1800 amphibs) floats is a one shot
drawing... nothing else and it doesn't do much for you anyways in the way of
helping with the build.

Glad the picture of the struts for the 1500's I sent you worked to clear
that portion up for you. Nose bumpers get installed at the very end so I
wouldn't dwell on it right now.. hopefully Murphy will get back to you to
advise if they have stock on a pair of them.

Pump out cups get installed on the sides as you don't really want to weaking
the top deck.. and you get less rain water leaching in with them on the
sides... choice is yours where you put them though.

I do have a CD available for the float build with almost 1200 pictures in
the exact order they get built. It's done for 1800 amphibs.. but I'm sure it
would help you along with the build for straights as well.

Cheers,
Wayne

----- Original Message -----
From: "Hjalmar Bardslokken" <bardslokkenh@videotron.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, December 05, 2009 8:05 AM
Subject: [rebel-builders] 1500 floats

Hello everyone,
My name is Hjalmar Bardslokken and I live in Quebec City.I've owned Rebel
308 ul since 2001.Before anyone starts guessing ,the name is Norwegian but
I was born in Canada.I bought myself a non finished Murphy 1500 float kit.
there are a few things missing.One being a CAD drawing of the floats,two
there was no bumpers and three no rigging. I do have the spreader bars.
Does anyone have a file you could send me of the Cad drawing? I sent an
e-mail to MAM about the bumpers NO ANSWER.
Also is there any particular reason people install the float cups on the
side of the floats instead of the top?

Thanks in advance for your help

HB




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Hjalmar Bardslokken

[rebel-builders] 1500 floats

Post by Hjalmar Bardslokken » Sun Feb 19, 2012 5:49 pm

thanks again Wayne ,we are not yet landed at pump out installation so we
have some time to think about it.

HB
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, December 05, 2009 6:52 PM
Subject: Re: [rebel-builders] 1500 floats

Hjalmar... The only CAD drawing of the (1800 amphibs) floats is a one shot
drawing... nothing else and it doesn't do much for you anyways in the way
of
helping with the build.

Glad the picture of the struts for the 1500's I sent you worked to clear
that portion up for you. Nose bumpers get installed at the very end so I
wouldn't dwell on it right now.. hopefully Murphy will get back to you to
advise if they have stock on a pair of them.

Pump out cups get installed on the sides as you don't really want to
weaking
the top deck.. and you get less rain water leaching in with them on the
sides... choice is yours where you put them though.

I do have a CD available for the float build with almost 1200 pictures in
the exact order they get built. It's done for 1800 amphibs.. but I'm sure
it
would help you along with the build for straights as well.

Cheers,
Wayne

----- Original Message -----
From: "Hjalmar Bardslokken" <bardslokkenh@videotron.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, December 05, 2009 8:05 AM
Subject: [rebel-builders] 1500 floats

Hello everyone,
My name is Hjalmar Bardslokken and I live in Quebec City.I've owned Rebel
308 ul since 2001.Before anyone starts guessing ,the name is Norwegian
but
I was born in Canada.I bought myself a non finished Murphy 1500 float
kit.
there are a few things missing.One being a CAD drawing of the floats,two
there was no bumpers and three no rigging. I do have the spreader bars.
Does anyone have a file you could send me of the Cad drawing? I sent an
e-mail to MAM about the bumpers NO ANSWER.
Also is there any particular reason people install the float cups on the
side of the floats instead of the top?

Thanks in advance for your help

HB




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Hjalmar Bardslokken

[rebel-builders] 1500 floats

Post by Hjalmar Bardslokken » Sun Feb 19, 2012 5:49 pm

308 is a great ul have had many enjoyable times on wheels and now want to go
to camp with it

HB
----- Original Message -----
From: "Hank & Vickie Balch" <cwfarm1@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, December 05, 2009 5:22 PM
Subject: Re: [rebel-builders] 1500 floats

HB

I don't have any answers to your questions, but I own Rebel 307 and I
thought it was interesting that you owned 308. I live in Hendersonville,
NC.

Hank Balch

On Sat, Dec 5, 2009 at 8:05 AM, Hjalmar Bardslokken <
bardslokkenh@videotron.ca> wrote:
Hello everyone,
My name is Hjalmar Bardslokken and I live in Quebec City.I've owned Rebel
308 ul since 2001.Before anyone starts guessing ,the name is Norwegian
but I
was born in Canada.I bought myself a non finished Murphy 1500 float kit.
there are a few things missing.One being a CAD drawing of the floats,two
there was no bumpers and three no rigging. I do have the spreader bars.
Does
anyone have a file you could send me of the Cad drawing? I sent an e-mail
to
MAM about the bumpers NO ANSWER.
Also is there any particular reason people install the float cups on the
side of the floats instead of the top?

Thanks in advance for your help

HB




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Locked

Return to “Rebel Builders List”