The Murphy Builders Site

For builders of Murphy Aircraft Manufacturing kits - Bringing builders together
https://www.murphybuilders.net/

[rebel-builders] Strut Material

https://www.murphybuilders.net/viewtopic.php?f=1&t=10455

Page 1 of 1

[rebel-builders] Strut Material

Posted: Sun Feb 19, 2012 5:49 pm
by Wayne G. O'Shea
You talking wing lift strut... or float mounting struts?

----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 04, 2009 10:29 AM
Subject: Re: [rebel-builders] Update to X-Plane Rebel model

Yes, no luck, only sheets and billets
thanks though. There must be a manufacturer out there that produces this
size of " Tubing", or?

cheers
Hans
640E

On Fri, Dec 4, 2009 at 7:22 AM, Richard Wampach
<rwampach@comcast.net>wrote:
Have you tried a salvage yard?

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Hans
Kuck
Sent: Friday, December 04, 2009 7:17 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Update to X-Plane Rebel model


Hi all,
I am looking for Strut material " Streamline Tubing " for my Elite. Does
anyone know where to source it. NO luck with MAM. Where does MAM get
theirs
from? any help would be appreciated cheers Hans 640E

On Fri, Dec 4, 2009 at 5:46 AM, Rob Luce <robluce1@yahoo.com> wrote:

Finished quite a few updates to the Rebel X-Plane model. Thanks to
Matt Smith for providing a bunch of input and measurements. Thanks to
Si and James for the Rebels to measure.

It's on the list server, in 402.



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username
"rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username "rebel"
password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Strut Material

Posted: Sun Feb 19, 2012 5:49 pm
by Wayne G. O'Shea
..and I should add.. they are BOTH custom extrusions... but specifying which
you are looking for may help if someone has extra around.

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 04, 2009 11:11 AM
Subject: Re: [rebel-builders] Strut Material

You talking wing lift strut... or float mounting struts?

----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 04, 2009 10:29 AM
Subject: Re: [rebel-builders] Update to X-Plane Rebel model

Yes, no luck, only sheets and billets
thanks though. There must be a manufacturer out there that produces this
size of " Tubing", or?

cheers
Hans
640E

On Fri, Dec 4, 2009 at 7:22 AM, Richard Wampach
<rwampach@comcast.net>wrote:
Have you tried a salvage yard?

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Hans
Kuck
Sent: Friday, December 04, 2009 7:17 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Update to X-Plane Rebel model


Hi all,
I am looking for Strut material " Streamline Tubing " for my Elite. Does
anyone know where to source it. NO luck with MAM. Where does MAM get
theirs
from? any help would be appreciated cheers Hans 640E

On Fri, Dec 4, 2009 at 5:46 AM, Rob Luce <robluce1@yahoo.com> wrote:
--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username
"rebel"
password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Strut Material

Posted: Sun Feb 19, 2012 5:49 pm
by Hans Kuck
Hi Wayne, Wing lift strut.

I have all kinds of T 3 2024 Alcoa extrusions for Float construction by the
way.

cheers
Hans
640E

I have a considerable stock of

On Fri, Dec 4, 2009 at 8:11 AM, Wayne G. O'Shea <oifa@irishfield.on.ca>wrote:
You talking wing lift strut... or float mounting struts?

----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 04, 2009 10:29 AM
Subject: Re: [rebel-builders] Update to X-Plane Rebel model

Yes, no luck, only sheets and billets
thanks though. There must be a manufacturer out there that produces this
size of " Tubing", or?

cheers
Hans
640E

On Fri, Dec 4, 2009 at 7:22 AM, Richard Wampach
<rwampach@comcast.net>wrote:
Have you tried a salvage yard?

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Hans
Kuck
Sent: Friday, December 04, 2009 7:17 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Update to X-Plane Rebel model


Hi all,
I am looking for Strut material " Streamline Tubing " for my Elite. Does
anyone know where to source it. NO luck with MAM. Where does MAM get
theirs
from? any help would be appreciated cheers Hans 640E

On Fri, Dec 4, 2009 at 5:46 AM, Rob Luce <robluce1@yahoo.com> wrote:
--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username
"rebel"
password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Strut Material

Posted: Sun Feb 19, 2012 5:49 pm
by Wayne G. O'Shea
Murphy doesn't have a single length there for you?? Would be so nice if they
did considering you're in BC.

I use to obtain it a dozen full lengths at a time, for Clamar Floats
spreader bars... but with the uncertainty of timely supply the last few
times that we needed it, ended up Clair had a die made and is getting it
extruded here in Ontario for less money. I haven't seen the finished profile
myself .. to be sure it's exactly the same..(but assume it to be identical)
but you'd be shipping from Ontario if he has some for you.

I used the last two lengths, of MAM's stuff, that I had left for an Amphib
install 2 weeks ago.

Send Clair an email clair.sceli@quadro.net if you're absolutely stuck...
tell him I sent you.. and ask if the extrusion is identical to what he was
getting through me. He's great to deal with..

Wayne

----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 04, 2009 11:52 AM
Subject: Re: [rebel-builders] Strut Material

Hi Wayne, Wing lift strut.

I have all kinds of T 3 2024 Alcoa extrusions for Float construction by
the
way.

cheers
Hans
640E

I have a considerable stock of

On Fri, Dec 4, 2009 at 8:11 AM, Wayne G. O'Shea
<oifa@irishfield.on.ca>wrote:
You talking wing lift strut... or float mounting struts?

----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 04, 2009 10:29 AM
Subject: Re: [rebel-builders] Update to X-Plane Rebel model

Yes, no luck, only sheets and billets
thanks though. There must be a manufacturer out there that produces
this
size of " Tubing", or?

cheers
Hans
640E

On Fri, Dec 4, 2009 at 7:22 AM, Richard Wampach
<rwampach@comcast.net>wrote:
"rebel"
--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Strut Material

Posted: Sun Feb 19, 2012 5:49 pm
by Jeff Micheal
Hans,

MAM had some issues with their email, my understanding now is all email
inquiries whether it be Tech or Parts is to go through murtech@murphyair.com

I'm pretty sure they still have some wing strut extrusion. Contact by
phone, you'll have to leave a message on the general voice mail...... you're
definitely better off doing it by email.

Remember guys, send everything through the Tech email if you want to get a
reply.

Cheers,
Jeff


On Fri, Dec 4, 2009 at 9:31 AM, Wayne G. O'Shea <oifa@irishfield.on.ca>wrote:
Murphy doesn't have a single length there for you?? Would be so nice if
they
did considering you're in BC.

I use to obtain it a dozen full lengths at a time, for Clamar Floats
spreader bars... but with the uncertainty of timely supply the last few
times that we needed it, ended up Clair had a die made and is getting it
extruded here in Ontario for less money. I haven't seen the finished
profile
myself .. to be sure it's exactly the same..(but assume it to be identical)
but you'd be shipping from Ontario if he has some for you.

I used the last two lengths, of MAM's stuff, that I had left for an Amphib
install 2 weeks ago.

Send Clair an email clair.sceli@quadro.net if you're absolutely stuck...
tell him I sent you.. and ask if the extrusion is identical to what he was
getting through me. He's great to deal with..

Wayne

----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 04, 2009 11:52 AM
Subject: Re: [rebel-builders] Strut Material

Hi Wayne, Wing lift strut.

I have all kinds of T 3 2024 Alcoa extrusions for Float construction by
the
way.

cheers
Hans
640E

I have a considerable stock of

On Fri, Dec 4, 2009 at 8:11 AM, Wayne G. O'Shea
<oifa@irishfield.on.ca>wrote:
You talking wing lift strut... or float mounting struts?

----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 04, 2009 10:29 AM
Subject: Re: [rebel-builders] Update to X-Plane Rebel model

Of
"rebel"


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Strut Material

Posted: Sun Feb 19, 2012 5:49 pm
by Hans Kuck
Thanks Wayne
MAM does not respond to my mails
I will contact Claire.
Thanks for the help

cheers
Hans
640E

On Fri, Dec 4, 2009 at 9:31 AM, Wayne G. O'Shea <oifa@irishfield.on.ca>wrote:
Murphy doesn't have a single length there for you?? Would be so nice if
they
did considering you're in BC.

I use to obtain it a dozen full lengths at a time, for Clamar Floats
spreader bars... but with the uncertainty of timely supply the last few
times that we needed it, ended up Clair had a die made and is getting it
extruded here in Ontario for less money. I haven't seen the finished
profile
myself .. to be sure it's exactly the same..(but assume it to be identical)
but you'd be shipping from Ontario if he has some for you.

I used the last two lengths, of MAM's stuff, that I had left for an Amphib
install 2 weeks ago.

Send Clair an email clair.sceli@quadro.net if you're absolutely stuck...
tell him I sent you.. and ask if the extrusion is identical to what he was
getting through me. He's great to deal with..

Wayne

----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 04, 2009 11:52 AM
Subject: Re: [rebel-builders] Strut Material

Hi Wayne, Wing lift strut.

I have all kinds of T 3 2024 Alcoa extrusions for Float construction by
the
way.

cheers
Hans
640E

I have a considerable stock of

On Fri, Dec 4, 2009 at 8:11 AM, Wayne G. O'Shea
<oifa@irishfield.on.ca>wrote:
You talking wing lift strut... or float mounting struts?

----- Original Message -----
From: "Hans Kuck" <hansk3d@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 04, 2009 10:29 AM
Subject: Re: [rebel-builders] Update to X-Plane Rebel model

Of
"rebel"


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
All times are UTC-08:00
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/