The Murphy Builders Site

I didn't use bushings but I know several builders who are now taking the
elevator off to create a bushing-attach approach. Folks are seeing wear in
the elevator attach points (though I don't have any yet in 101+ hours, and
didn't see any after 240+ hours in my previous Moose either).

I don't know of anyone that I can think of off-hand that is putting bushings
in the rudder attach points. I did see an interesting rudder attach design
in a Harmon Rocket last weekend. That design used Heim (Aurora) rod-end
bearings as part of the rudder assembly. I have pictures if anyone wants to
see them.

Ted
Moose N384JP


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Fred
Messinger (fredm)
Sent: Saturday, November 28, 2009 3:22 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Stabilizer/Elevator hing bushings for Moose.

Hi Guys,

I'm at the point where I want to install bushings in the elevator/stabilizer
hinges before I close up the elevator. I think I also want to do this for
the rudder.

How have you guys done this? What size ( OD and thickness) bushing have you
used and how are they arranged?

I searched the archives but didn't get a hit.

Thanks,
Fred




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------