washers on torque tube ?
Posted: Sun Feb 19, 2012 5:46 pm
Can someone confirm for me if there is a metal washer between the spacer
and the delrin bushing on both the inboard and outboard torque tube
brackets. I only installed the inboard one as the outboard one caused the
control arm to rub against the rib. In hindsight I am guessing there should
always be a washer between the spacer and the plastic bushing.
Roland
R56
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
and the delrin bushing on both the inboard and outboard torque tube
brackets. I only installed the inboard one as the outboard one caused the
control arm to rub against the rib. In hindsight I am guessing there should
always be a washer between the spacer and the plastic bushing.
Roland
R56
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------