The Murphy Builders Site

thank you Jeff,
I read with pleasure what you've written, especially since it's
rather good
news.
Can you tell me what propeller should be better for an
amphibious Elite, I
think a senssenich, but for which O 320 A2B

Bernard


On 11/13/2009 10:45 AM, westcoastkitplanes@gmail.com wrote to
rebel-
builders:

-> Hi Guys,
->
-> To the best of my knowledge (which is sometime good), there
is only one
cowl
-> (fiberglass) for the Elite and Rebel. The factory
(MAM) did a change up a
-> few years back to make one cowl fit both applications.......
Elite and
-> Rebel.
->
-> Cheers,
-> Jeff
->
->
-> On Fri, Nov 13, 2009 at 10:28 AM,
<bernard.liagre@dcsol.com> wrote:
->
-> > Hi Dennis
-> > thank you for your reply
-> > you confirm that there are specific caps for the Elite
-> > my engine is a 0 320
-> >
-> > Bernard
-> >
-> >
-> > On 11/13/2009 8:12 AM, croydonmac@gmail.com wrote to rebel-
builders:-> >
-> > -> Hi Bernard
-> > -> Be careful that you get the newest model of cowl for the
elite not a
-> > -> rebel cowl if you are using the O-360 thay are different
and when
-> > -> fitting made sure you make the inlet openings as large
as possible and
-> > -> make sure you have a large anofe exit area.
-> > ->
-> > ->
-> > ->
-> > -> Dennis Finley
-> > ->
-> > -> Elite Amphib C-FDYF
-> > ->
-> > ->
-> > ->
-> > ->
-> > -> 2009/11/13 <bernard.liagre@dcsol.com>:
-> > -> > Hello All,
-> > -> > I am on this list for several days, I read your
messages, and I must
-> > say
-> > that
-> > -> > from where I am, it feels good.
-> > -> > I built an Elite No 801, I am based in Biscarrosse in
France and
-> > outside a
-> > small
-> > -> > group of people, I feel very alone and far.
-> > -> > I share the same problems as many of you and I have
many
technical
-> > issues
-> > -> > and the parts you have.
-> > -> > I should not have been able to join Murphy in recent
months, and
-> > thanks
-> > to
-> > -> > you, I understood why.
-> > -> > ÿÿI have not come on this site to complain because I
can
understand the
-> > -> > difficulties faced by Murphy and I will retain their
willingness to
-> > help
-> > builders
-> > -> > complete their aircraft.
-> > -> > in France there is little seaplane and I fell in love
with the Elite
-> > for that. I
-> > -> > hope to fly with my Elite Floats and hopefully will
have enough for
-> > that
-> > (if my
-> > -> > wife has not left the by) ... I'm joking
-> > -> >
-> > -> >
-> > -> > Question: I want to buy engine cowls for the Elite, is
that someone
-> > can
-> > tell
-> > -> > me if they agree Rebel
-> > -> >
-> > -> > thank you
-> > -> > Regards
-> > -> > Bernard
-> > -> >
-> > -> >
-> > -> >
-> > -> >
-> > -> > -------------------------------------------------------
----------
-> > -> > ÿÿList archives located at: https://mail.dcsol.com/login
-> > -> > ÿÿusername "rebel" password "builder"
-> > -> > ÿÿUnsubscribe: rebel-builders-unsubscribe@dcsol.com
-> > -> > ÿÿList administrator: mike.davis@dcsol.com
-> > -> > -------------------------------------------------------
----------
-> > -> >
-> > -> >
-> > -> >
-> > -> >
-> >
-> >
-> >
-> >
-> > ------------------------------------------------------------
-----
-> > List archives located at: https://mail.dcsol.com/login
-> > username "rebel" password "builder"
-> > Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> > List administrator: mike.davis@dcsol.com
-> > ------------------------------------------------------------
-----
-> >
-> >
-> >
-> >
->




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------