The Murphy Builders Site

Hi Geert !!

Sorry, I'm temporarily out of action with a horrible flu bug !
It started on Friday, and I wasn't in good shape for the Builders
Meeting, but it really got bad yesterday - lots of it going around !

The heater can mount right under the panel - just add a bracket
to the support tubes & hook up the plumbing ! Wayne's right - it's
just a single speed/ on-off motor, and you can regulate heat with a
water valve. Might be handy to have that valve on the panel, too.

You're having more luck than us - haven't seen ANY of those
heaters here in over a year !

I don't think it would be a good idea to try using Elite
bellcranks - the whole setup is a bit different, but the Rebel
bellcranks have changed several times over the years. You might
want to get the dimensions for the current parts & compare.

Of course, the best solution is just to go back to the
flapperons, which work just great !! ;-) No problem with
gusty 25 Kt. crosswinds ... :-)

Heading back to bed ....

....bobp

---------------------------orig.--------------------------------------
At , you wrote:

At 10:26 AM 11/14/00 -0500, you wrote:

----------*

----------*