Page 1 of 2

[rebel-builders] Teleflex Cable

Posted: Sun Feb 19, 2012 5:37 pm
by craig
Hi Charlie,

My teleflex is 72 1/4". The one that came with the split flaps kit is I was
trying to sell is 66 1/4". They must have given you the wrong one. That's
no good. Sorry for that bit of bad news. CW




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Teleflex Cable

Posted: Sun Feb 19, 2012 5:37 pm
by Ron Shannon
Charlie,

I have a longer Teleflex I'm not going to use because I built an electric
actuator system. Contact me direct if you want it for peanuts, or less. :-)

Ron
254R


On Tue, Oct 6, 2009 at 3:42 PM, Charlie Eubanks <charlie@troyairpark.com>wrote:
Hello All
Any Rebel builder out there who can readily measure the length, tip/to tip
of there Teleflex cable? Mine measure 66 1/4" and I am concerned it might
be
about 3-4" short. I can not route it behind and over the 2" aileron torque
tube and reach the flap handle. Thanks in advance.
Charlie E. 802R


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Teleflex Cable

Posted: Sun Feb 19, 2012 5:37 pm
by gleeso1
G'Day All,
Mine is 74 1/8" just to confuse the issue. That's threaded end to end.

Sorry Charlie.

Regards
John
Rebel 804 down under.

craig wrote:
Hi Charlie,

My teleflex is 72 1/4". The one that came with the split flaps kit is I was
trying to sell is 66 1/4". They must have given you the wrong one. That's
no good. Sorry for that bit of bad news. CW




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Teleflex Cable

Posted: Sun Feb 19, 2012 5:37 pm
by craig
That's the Australian difference; below the equator. :)



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Teleflex Cable

Posted: Sun Feb 19, 2012 5:37 pm
by Jeff Micheal
Charlie,

Teleflex Cable #4703GG5-074B (74 inch) for the Rebel flapperon system.

Cheers,
Jeff


On Tue, Oct 6, 2009 at 10:24 PM, craig <snowyrvr@mtaonline.net> wrote:
That's the Australian difference; below the equator. :)



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Teleflex Cable

Posted: Sun Feb 19, 2012 5:37 pm
by Charlie Eubanks
Ron, Craig, John & Jeff
Thanks for the help in solving my problem. If Ron's cable is available I am
back in business. Don't know what we would do without this net. Thanks
again.
Charlie E. 802R
----- Original Message -----
From: "Charlie Eubanks" <charlie@troyairpark.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, October 06, 2009 5:42 PM
Subject: [rebel-builders] Teleflex Cable

Hello All
Any Rebel builder out there who can readily measure the length, tip/to tip
of there Teleflex cable? Mine measure 66 1/4" and I am concerned it might
be
about 3-4" short. I can not route it behind and over the 2" aileron torque
tube and reach the flap handle. Thanks in advance.
Charlie E. 802R




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Teleflex Cable

Posted: Sun Feb 19, 2012 5:37 pm
by mike jones
My cable says 4703gg5-072b, 3451 so guess I have a 72 inch cable, couple of
inches short but seems to reach but have to go pretty direct to connect it

cheers

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jeff
Micheal
Sent: Wednesday, October 07, 2009 2:00 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Teleflex Cable

Charlie,

Teleflex Cable #4703GG5-074B (74 inch) for the Rebel flapperon system.

Cheers,
Jeff


On Tue, Oct 6, 2009 at 10:24 PM, craig <snowyrvr@mtaonline.net> wrote:
That's the Australian difference; below the equator. :)



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Teleflex Cable

Posted: Sun Feb 19, 2012 5:37 pm
by Jeff Micheal
Mike,

The part number I gave is from a current ship list.......... I'm sure your
list might be a "tad" outdated. Either way 72" to 74" looks like it will
work.

Cheers,
Jeff


On Wed, Oct 7, 2009 at 2:12 PM, mike jones <mfjrebel007r@cogeco.ca> wrote:
My cable says 4703gg5-072b, 3451 so guess I have a 72 inch cable, couple of
inches short but seems to reach but have to go pretty direct to connect it

cheers

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jeff
Micheal
Sent: Wednesday, October 07, 2009 2:00 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Teleflex Cable

Charlie,

Teleflex Cable #4703GG5-074B (74 inch) for the Rebel flapperon system.

Cheers,
Jeff


On Tue, Oct 6, 2009 at 10:24 PM, craig <snowyrvr@mtaonline.net> wrote:
That's the Australian difference; below the equator. :)



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Teleflex Cable

Posted: Sun Feb 19, 2012 5:37 pm
by N.Smith
Hi Charlie
I think what you have there is an Elite cable. It's quite a bit shorter than
the rebel one !
Nig
745E

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Charlie Eubanks
Sent: 07 October 2009 12:59
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Teleflex Cable

Ron, Craig, John & Jeff
Thanks for the help in solving my problem. If Ron's cable is available I am
back in business. Don't know what we would do without this net. Thanks
again.
Charlie E. 802R
----- Original Message -----
From: "Charlie Eubanks" <charlie@troyairpark.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, October 06, 2009 5:42 PM
Subject: [rebel-builders] Teleflex Cable

Hello All
Any Rebel builder out there who can readily measure the length, tip/to tip
of there Teleflex cable? Mine measure 66 1/4" and I am concerned it might
be
about 3-4" short. I can not route it behind and over the 2" aileron torque
tube and reach the flap handle. Thanks in advance.
Charlie E. 802R




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.421 / Virus Database: 270.14.5/2419 - Release Date: 10/07/09
05:18:00




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Teleflex Cable

Posted: Sun Feb 19, 2012 5:37 pm
by Charlie Eubanks
Thanks for the info Nig
Looks like Ron Shannon has come to my rescue. He has a unused cable he is
going to send me. Did Philippe Berjaud ever get his gear fixed on his Elite
back in the air?
Charlie E. 802R
----- Original Message -----
From: "N.Smith" <admin@airnig.co.uk>
To: <rebel-builders@dcsol.com>
Sent: Thursday, October 08, 2009 6:14 AM
Subject: RE: [rebel-builders] Teleflex Cable

Hi Charlie
I think what you have there is an Elite cable. It's quite a bit shorter
than
the rebel one !
Nig
745E

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Charlie Eubanks
Sent: 07 October 2009 12:59
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Teleflex Cable

Ron, Craig, John & Jeff
Thanks for the help in solving my problem. If Ron's cable is available I
am
back in business. Don't know what we would do without this net. Thanks
again.
Charlie E. 802R
----- Original Message -----
From: "Charlie Eubanks" <charlie@troyairpark.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, October 06, 2009 5:42 PM
Subject: [rebel-builders] Teleflex Cable

Hello All
Any Rebel builder out there who can readily measure the length, tip/to
tip
of there Teleflex cable? Mine measure 66 1/4" and I am concerned it might
be
about 3-4" short. I can not route it behind and over the 2" aileron
torque
tube and reach the flap handle. Thanks in advance.
Charlie E. 802R




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.421 / Virus Database: 270.14.5/2419 - Release Date: 10/07/09
05:18:00




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Teleflex Cable

Posted: Sun Feb 19, 2012 5:37 pm
by Philippe BERJAUD
Hello Charlie,
We eventually fixed the landing gear and I made about 40 hrs of flight during the summer and 120 landings and so far, it works all right . Thank you again for the tube. It helped me a lot.
Regards.
Philippe




Message du 08/10/09 13:59
De : "Charlie Eubanks"
A : rebel-builders@dcsol.com
Copie à :
Objet : Re: [rebel-builders] Teleflex Cable


Thanks for the info Nig
Looks like Ron Shannon has come to my rescue. He has a unused cable he is
going to send me. Did Philippe Berjaud ever get his gear fixed on his Elite
back in the air?
Charlie E. 802R
----- Original Message -----
From: "N.Smith"
To:
Sent: Thursday, October 08, 2009 6:14 AM
Subject: RE: [rebel-builders] Teleflex Cable

Hi Charlie
I think what you have there is an Elite cable. It's quite a bit shorter
than
the rebel one !
Nig
745E

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Charlie Eubanks
Sent: 07 October 2009 12:59
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Teleflex Cable

Ron, Craig, John & Jeff
Thanks for the help in solving my problem. If Ron's cable is available I
am
back in business. Don't know what we would do without this net. Thanks
again.
Charlie E. 802R
----- Original Message -----
From: "Charlie Eubanks"
To:
Sent: Tuesday, October 06, 2009 5:42 PM
Subject: [rebel-builders] Teleflex Cable

Hello All
Any Rebel builder out there who can readily measure the length, tip/to
tip
of there Teleflex cable? Mine measure 66 1/4" and I am concerned it might
be
about 3-4" short. I can not route it behind and over the 2" aileron
torque
tube and reach the flap handle. Thanks in advance.
Charlie E. 802R




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.421 / Virus Database: 270.14.5/2419 - Release Date: 10/07/09
05:18:00




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Teleflex Cable

Posted: Sun Feb 19, 2012 5:37 pm
by Charlie Eubanks
Hello Philippe
Good to hear from you, glad you are back in the air and everything is
working well. I don't know if you have been following the net recently but
Ron Shannon just came to my rescue with the right Teleflex cable I needed.
This pay forward thing really works. Happy flying.
Charlie E. 802R
----- Original Message -----
From: "Philippe BERJAUD" <philiberj@orange.fr>
To: <rebel-builders@dcsol.com>
Sent: Thursday, October 08, 2009 7:34 AM
Subject: Re: [rebel-builders] Teleflex Cable


[quote]Hello Charlie,
We eventually fixed the landing gear and I made about 40 hrs of flight
during the summer and 120 landings and so far, it works all right . Thank
you again for the tube. It helped me a lot.
Regards.
Philippe





[quote]Message du 08/10/09 13:59
De : "Charlie Eubanks"
A : rebel-builders@dcsol.com
Copie

[rebel-builders] Teleflex cable

Posted: Sun Feb 19, 2012 11:34 pm
by Wayne G. O'Shea
Paul... sorry I didn't have what you/he needs. They are a Marine industry
item and Teleflex gets it's name from the company of the same name...
although they could be a generic item bought elsewhere.

Did you try sending the factory an email as I suggested?

Wayne

----- Original Message -----
From: "Paul Michel" <n616pm@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, October 07, 2011 10:10 PM
Subject: [rebel-builders] Teleflex cable

Hey group:

My good friend in Brazil, Jose Gozzi, is on the final leg of his Rebel
project and is in dire need of the shorter Teleflex Cable for his split
flap/aeileron. He says it is supposed to be 66 1/4 inches long and has a
74
inch like mine.

Does anyone have one available for purchase and/or lease etc. so I can get
him flying ASAP? As soon as I can procure one from MAC I will return it
and
pay all the postages etc.

One of his sons will be coming to the US in a few weeks and I would like
to
have it available for him to hand carry it back to Brazil with him.

Or can anyone tell me who the vendor for the original is so I can go
direct
procurement or have the spare I have modified to the shorter length.

Paul J. Michel
Suwannee [image: Options]Belle Airport (9FL0)
O'Brien, Florida




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Teleflex cable

Posted: Sun Feb 19, 2012 11:34 pm
by Paul Michel
Wayne
Yep on the factory. I understand with their current workload it takes a bit
of time and just would like to have all my ducks in a row when Jose's son is
here in Florida.

Paul

On Fri, Oct 7, 2011 at 10:23 PM, Wayne G. O'Shea <oifa@irishfield.on.ca>wrote:
Paul... sorry I didn't have what you/he needs. They are a Marine industry
item and Teleflex gets it's name from the company of the same name...
although they could be a generic item bought elsewhere.

Did you try sending the factory an email as I suggested?

Wayne

----- Original Message -----
From: "Paul Michel" <n616pm@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, October 07, 2011 10:10 PM
Subject: [rebel-builders] Teleflex cable

Hey group:

My good friend in Brazil, Jose Gozzi, is on the final leg of his Rebel
project and is in dire need of the shorter Teleflex Cable for his split
flap/aeileron. He says it is supposed to be 66 1/4 inches long and has a
74
inch like mine.

Does anyone have one available for purchase and/or lease etc. so I can
get
him flying ASAP? As soon as I can procure one from MAC I will return it
and
pay all the postages etc.

One of his sons will be coming to the US in a few weeks and I would like
to
have it available for him to hand carry it back to Brazil with him.

Or can anyone tell me who the vendor for the original is so I can go
direct
procurement or have the spare I have modified to the shorter length.

Paul J. Michel
Suwannee [image: Options]Belle Airport (9FL0)
O'Brien, Florida




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Teleflex cable

Posted: Sun Feb 19, 2012 11:34 pm
by Wayne G. O'Shea
Chances are Darryl will answer your email on a/the weekend.. late at night.

----- Original Message -----
From: "Paul Michel" <n616pm@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, October 07, 2011 10:35 PM
Subject: Re: [rebel-builders] Teleflex cable

Wayne
Yep on the factory. I understand with their current workload it takes a
bit
of time and just would like to have all my ducks in a row when Jose's son
is
here in Florida.

Paul

On Fri, Oct 7, 2011 at 10:23 PM, Wayne G. O'Shea
<oifa@irishfield.on.ca>wrote:
Paul... sorry I didn't have what you/he needs. They are a Marine industry
item and Teleflex gets it's name from the company of the same name...
although they could be a generic item bought elsewhere.

Did you try sending the factory an email as I suggested?

Wayne

----- Original Message -----
From: "Paul Michel" <n616pm@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, October 07, 2011 10:10 PM
Subject: [rebel-builders] Teleflex cable

Hey group:

My good friend in Brazil, Jose Gozzi, is on the final leg of his Rebel
project and is in dire need of the shorter Teleflex Cable for his split
flap/aeileron. He says it is supposed to be 66 1/4 inches long and has
a
74
inch like mine.

Does anyone have one available for purchase and/or lease etc. so I can
get
him flying ASAP? As soon as I can procure one from MAC I will return
it
and
pay all the postages etc.

One of his sons will be coming to the US in a few weeks and I would
like
to
have it available for him to hand carry it back to Brazil with him.

Or can anyone tell me who the vendor for the original is so I can go
direct
procurement or have the spare I have modified to the shorter length.

Paul J. Michel
Suwannee [image: Options]Belle Airport (9FL0)
O'Brien, Florida




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------