The Murphy Builders Site

Hi Dennis, I'm a long ways from needing your powerplant but any idea what
kind of $ would be involved. I'm working on Elite # 710 / 631 I'm a
little confused as to which serial no. to use as I'm started and registered
for 710E then bought the complete kit, partially started, #631 to get a
fuselage. I have empenage completed and inspected, wings inspected for
close up for #710E Then with # 631 there is empenage completed and some
work started on a wing. If anyone is interested I would sell the later
parts ( tail and wing parts ) for #631
I hope this stirs up a hornets nest of interest. Bob 710E

----- Original Message -----
From: "Dennis Finley" <croydonmac@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, September 28, 2009 8:16 PM
Subject: [rebel-builders] engine and prop for sale

Hi all
I have an O-360 180 hp and Sensenich 76/54 prop for sale both in
pristine shape with 130 hours smoh on engine and 130 sn on the prop.
they are still in the plane and being used,I'm hoping to put in an
O-375 215 hp this winter,in my Elite amphib any body interested drop
me a line

Dennis
Finley
C-FDYF



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi Bob
I would like to get 18500.00 can for both the prop and engine together
,the O-360 is a solid crank engine so their are no RPM restrictions
both only have 130 hr and in the plane so some one could fly the plane
to check out the engine.



Dennis Finley

Elite amphib C-FDYF





On Mon, Sep 28, 2009 at 9:12 PM, Bob Bjorn <bjornretd@xplornet.com> wrote:
[quote]Hi Dennis,