My Rebel engine baffle has put a mark on the cowling fiber glass cover, I noticed a chipped paint came off the cowling, the location is near the corner of #3 cylinder where baffle bent 90 degree. Any one knows waht's the baffle to cowling clearance should be? I think it was cuased during Engine start, otherwise it would be worse, my prop dynamic test was better than normal.
Jay/N654JM
_________________________________________________________________
Bing
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions