The Murphy Builders Site

My stick deflects 16* L & 16* R. I don't know what that equates to on the
bottom (torque tube inside), especially as I have custom parts in that area.
But, knowing the 16* each side deflection, you ought to be able to figure
out the distance.

Hope this helps,

Ted

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jason
Beall
Sent: Sunday, September 13, 2009 9:40 AM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] SR/Moose control deflection and spacers in
torque tube

Thanks Ted for doing that for me.

I spent six hours on it yesterday and had to disassemble it in the end!

-J

--- On Sat, 9/12/09, Ted Waltman <ted@vafm.org> wrote:

From: Ted Waltman <ted@vafm.org>
Subject: RE: [rebel-builders] SR/Moose control deflection and spacers in

torque tube

To: rebel-builders@dcsol.com
Date: Saturday, September 12, 2009, 5:17 PM
Jason,

Glad to hear you're having as much fun with the control
column as I've had!
<grin>.

I'll measure control column deflection in degrees next time
I'm at the
hangar for you.