Wayne, I noticed in one of your float pictures in the archives that you had
mirrors mounted on the floats, presumably to check for wheels up and down. I
was just wondering where you got these. Can they be found at a local
Canadian Tire or some truck shop? I would like to do mine so I can visually
confirm each wheel up or down prior to landings.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Mirrors for floats
-
Wayne G. O'Shea
Mirrors for floats
Walter, the mirrors on the amphib that I sold were oval convex mirrors that
are available at Canadian Tire. About 8" x 5". When positioned in the right
place you can see the main wheel hanging down and by putting your head back
over your seat and looking in the mirror you can see the nose wheel in the
down position. Your passenger can do the same for you on their side or if by
yourself you can assume that if you CAN'T see 2 wheels in the mirror on the
passenger side and the pilot side nose wheel is up where you can clearly see
it, then you are alright for a water landing. If worried something is wrong
you can undo your harness and slip over to the passenger seat and have alook
for yourself. Once in the right place there is double face tape on the backs
of the mirrors, but you will also want to put silicon or similar all the way
around to hold it firmly in place.
Howard has been flying for 4 summers without any indicators or mirrors. You
will find once you get used to the aircraft that you can count the strokes
required to retract and extend the gear, along with the pressure indication
(spikes) as each cylinder locks into position. If it is taking longer than
usual you probably have a leak somewhere. If this happens you can look out
both sides to see if the nose wheels are up as they are what will flip you
in the water!
When you have everything hooked up, make sure you block the floats and do
about 20 retract test to make sure everything is working smoothly. 100 to
150 psi is all that you should see with everything locked down, but on you
last test pull her up to about 280/300psi and leave it there, to make sure
nothing is going to blow apart on you while flying the thing.
Regards,
Wayne G. O'Shea
www.irishfield.on.ca
----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@home.com>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, July 25, 2001 11:09 PM
Subject: Mirrors for floats
*-------------------------------------------------------------------------*
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
are available at Canadian Tire. About 8" x 5". When positioned in the right
place you can see the main wheel hanging down and by putting your head back
over your seat and looking in the mirror you can see the nose wheel in the
down position. Your passenger can do the same for you on their side or if by
yourself you can assume that if you CAN'T see 2 wheels in the mirror on the
passenger side and the pilot side nose wheel is up where you can clearly see
it, then you are alright for a water landing. If worried something is wrong
you can undo your harness and slip over to the passenger seat and have alook
for yourself. Once in the right place there is double face tape on the backs
of the mirrors, but you will also want to put silicon or similar all the way
around to hold it firmly in place.
Howard has been flying for 4 summers without any indicators or mirrors. You
will find once you get used to the aircraft that you can count the strokes
required to retract and extend the gear, along with the pressure indication
(spikes) as each cylinder locks into position. If it is taking longer than
usual you probably have a leak somewhere. If this happens you can look out
both sides to see if the nose wheels are up as they are what will flip you
in the water!
When you have everything hooked up, make sure you block the floats and do
about 20 retract test to make sure everything is working smoothly. 100 to
150 psi is all that you should see with everything locked down, but on you
last test pull her up to about 280/300psi and leave it there, to make sure
nothing is going to blow apart on you while flying the thing.
Regards,
Wayne G. O'Shea
www.irishfield.on.ca
----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@home.com>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, July 25, 2001 11:09 PM
Subject: Mirrors for floats
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*The list archives are located at:
http://www.dcsol.com:81/public/default.htm
username: rebel password: builder
hadWayne, I noticed in one of your float pictures in the archives that you
Imirrors mounted on the floats, presumably to check for wheels up and down.
visuallywas just wondering where you got these. Can they be found at a local
Canadian Tire or some truck shop? I would like to do mine so I can
*-------------------------------------------------------------------------*confirm each wheel up or down prior to landings.
*-------------------------------------------------------------------------*You have received this message because you have subscribed to the
murphy-rebel mailing list.
To unsubscribe from this list, send an e-mail to: list-server@dcsol.com
with "unsubscribe murphy-rebel" in the body of the message.
For assistance contact mike.davis@dcsol.com
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Walter Klatt
Mirrors for floats
Thanks again, Wayne for that great information. Next week I'm on vacation,
and may try to do the final mounting then. I'm also trying to line up an
instructor to get my float endorsement on the Rebel. If I can't, though, I
will likely hold off and stay flying on wheels a bit longer. I assume you
need that rating to fly an amphib even if you stay off the water.
-----Original Message-----
From: murphy-rebel@dcsol.com [mailto:murphy-rebel@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: July 26, 2001 5:21 PM
To: murphy-rebel@dcsol.com
Subject: Re: Mirrors for floats
*-------------------------------------------------------------------------*
The list archives are located at:
http://www.dcsol.com:81/public/default.htm
username: rebel password: builder
*-------------------------------------------------------------------------*
Walter, the mirrors on the amphib that I sold were oval convex mirrors that
are available at Canadian Tire. About 8" x 5". When positioned in the right
place you can see the main wheel hanging down and by putting your head back
over your seat and looking in the mirror you can see the nose wheel in the
down position. Your passenger can do the same for you on their side or if by
yourself you can assume that if you CAN'T see 2 wheels in the mirror on the
passenger side and the pilot side nose wheel is up where you can clearly see
it, then you are alright for a water landing. If worried something is wrong
you can undo your harness and slip over to the passenger seat and have alook
for yourself. Once in the right place there is double face tape on the backs
of the mirrors, but you will also want to put silicon or similar all the way
around to hold it firmly in place.
Howard has been flying for 4 summers without any indicators or mirrors. You
will find once you get used to the aircraft that you can count the strokes
required to retract and extend the gear, along with the pressure indication
(spikes) as each cylinder locks into position. If it is taking longer than
usual you probably have a leak somewhere. If this happens you can look out
both sides to see if the nose wheels are up as they are what will flip you
in the water!
When you have everything hooked up, make sure you block the floats and do
about 20 retract test to make sure everything is working smoothly. 100 to
150 psi is all that you should see with everything locked down, but on you
last test pull her up to about 280/300psi and leave it there, to make sure
nothing is going to blow apart on you while flying the thing.
Regards,
Wayne G. O'Shea
www.irishfield.on.ca
----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@home.com>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, July 25, 2001 11:09 PM
Subject: Mirrors for floats
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*
You have received this message because you have subscribed to the
murphy-rebel mailing list.
To unsubscribe from this list, send an e-mail to: list-server@dcsol.com
with "unsubscribe murphy-rebel" in the body of the message.
For assistance contact mike.davis@dcsol.com
*-------------------------------------------------------------------------*
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
and may try to do the final mounting then. I'm also trying to line up an
instructor to get my float endorsement on the Rebel. If I can't, though, I
will likely hold off and stay flying on wheels a bit longer. I assume you
need that rating to fly an amphib even if you stay off the water.
-----Original Message-----
From: murphy-rebel@dcsol.com [mailto:murphy-rebel@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: July 26, 2001 5:21 PM
To: murphy-rebel@dcsol.com
Subject: Re: Mirrors for floats
*-------------------------------------------------------------------------*
The list archives are located at:
http://www.dcsol.com:81/public/default.htm
username: rebel password: builder
*-------------------------------------------------------------------------*
Walter, the mirrors on the amphib that I sold were oval convex mirrors that
are available at Canadian Tire. About 8" x 5". When positioned in the right
place you can see the main wheel hanging down and by putting your head back
over your seat and looking in the mirror you can see the nose wheel in the
down position. Your passenger can do the same for you on their side or if by
yourself you can assume that if you CAN'T see 2 wheels in the mirror on the
passenger side and the pilot side nose wheel is up where you can clearly see
it, then you are alright for a water landing. If worried something is wrong
you can undo your harness and slip over to the passenger seat and have alook
for yourself. Once in the right place there is double face tape on the backs
of the mirrors, but you will also want to put silicon or similar all the way
around to hold it firmly in place.
Howard has been flying for 4 summers without any indicators or mirrors. You
will find once you get used to the aircraft that you can count the strokes
required to retract and extend the gear, along with the pressure indication
(spikes) as each cylinder locks into position. If it is taking longer than
usual you probably have a leak somewhere. If this happens you can look out
both sides to see if the nose wheels are up as they are what will flip you
in the water!
When you have everything hooked up, make sure you block the floats and do
about 20 retract test to make sure everything is working smoothly. 100 to
150 psi is all that you should see with everything locked down, but on you
last test pull her up to about 280/300psi and leave it there, to make sure
nothing is going to blow apart on you while flying the thing.
Regards,
Wayne G. O'Shea
www.irishfield.on.ca
----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@home.com>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, July 25, 2001 11:09 PM
Subject: Mirrors for floats
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*The list archives are located at:
http://www.dcsol.com:81/public/default.htm
username: rebel password: builder
hadWayne, I noticed in one of your float pictures in the archives that you
Imirrors mounted on the floats, presumably to check for wheels up and down.
visuallywas just wondering where you got these. Can they be found at a local
Canadian Tire or some truck shop? I would like to do mine so I can
*-------------------------------------------------------------------------*confirm each wheel up or down prior to landings.
*-------------------------------------------------------------------------*You have received this message because you have subscribed to the
murphy-rebel mailing list.
To unsubscribe from this list, send an e-mail to: list-server@dcsol.com
with "unsubscribe murphy-rebel" in the body of the message.
For assistance contact mike.davis@dcsol.com
*-------------------------------------------------------------------------*
You have received this message because you have subscribed to the
murphy-rebel mailing list.
To unsubscribe from this list, send an e-mail to: list-server@dcsol.com
with "unsubscribe murphy-rebel" in the body of the message.
For assistance contact mike.davis@dcsol.com
*-------------------------------------------------------------------------*
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Wayne G. O'Shea
Mirrors for floats
My personal opinion is that it's just a retractable gear aircraft <IF> you
stick to pavement only, also the opinion with <SOME> of the individuals at
Transport Canada. Your insurance company and others at Transport are sure to
have a different opinion of that though, so be cautious and govern yourself
accordingly! A phone call to your local Transport Office might clear things
up on that issue (or turn then to mud) who knows.
Wayne
----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@home.com>
To: <murphy-rebel@dcsol.com>
Sent: Friday, July 27, 2001 9:22 AM
Subject: RE: Mirrors for floats
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
stick to pavement only, also the opinion with <SOME> of the individuals at
Transport Canada. Your insurance company and others at Transport are sure to
have a different opinion of that though, so be cautious and govern yourself
accordingly! A phone call to your local Transport Office might clear things
up on that issue (or turn then to mud) who knows.
Wayne
----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@home.com>
To: <murphy-rebel@dcsol.com>
Sent: Friday, July 27, 2001 9:22 AM
Subject: RE: Mirrors for floats
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*The list archives are located at:
http://www.dcsol.com:81/public/default.htm
username: rebel password: builder
*-------------------------------------------------------------------------*Thanks again, Wayne for that great information. Next week I'm on vacation,
and may try to do the final mounting then. I'm also trying to line up an
instructor to get my float endorsement on the Rebel. If I can't, though, I
will likely hold off and stay flying on wheels a bit longer. I assume you
need that rating to fly an amphib even if you stay off the water.
-----Original Message-----
From: murphy-rebel@dcsol.com [mailto:murphy-rebel@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: July 26, 2001 5:21 PM
To: murphy-rebel@dcsol.com
Subject: Re: Mirrors for floats
*-------------------------------------------------------------------------*The list archives are located at:
http://www.dcsol.com:81/public/default.htm
username: rebel password: builder
thatWalter, the mirrors on the amphib that I sold were oval convex mirrors
rightare available at Canadian Tire. About 8" x 5". When positioned in the
backplace you can see the main wheel hanging down and by putting your head
byover your seat and looking in the mirror you can see the nose wheel in the
down position. Your passenger can do the same for you on their side or if
theyourself you can assume that if you CAN'T see 2 wheels in the mirror on
seepassenger side and the pilot side nose wheel is up where you can clearly
wrongit, then you are alright for a water landing. If worried something is
alookyou can undo your harness and slip over to the passenger seat and have
backsfor yourself. Once in the right place there is double face tape on the
wayof the mirrors, but you will also want to put silicon or similar all the
Youaround to hold it firmly in place.
Howard has been flying for 4 summers without any indicators or mirrors.
indicationwill find once you get used to the aircraft that you can count the strokes
required to retract and extend the gear, along with the pressure
*-------------------------------------------------------------------------*(spikes) as each cylinder locks into position. If it is taking longer than
usual you probably have a leak somewhere. If this happens you can look out
both sides to see if the nose wheels are up as they are what will flip you
in the water!
When you have everything hooked up, make sure you block the floats and do
about 20 retract test to make sure everything is working smoothly. 100 to
150 psi is all that you should see with everything locked down, but on you
last test pull her up to about 280/300psi and leave it there, to make sure
nothing is going to blow apart on you while flying the thing.
Regards,
Wayne G. O'Shea
www.irishfield.on.ca
----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@home.com>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, July 25, 2001 11:09 PM
Subject: Mirrors for floats
*-------------------------------------------------------------------------*The list archives are located at:
http://www.dcsol.com:81/public/default.htm
username: rebel password: builder
down.hadWayne, I noticed in one of your float pictures in the archives that youmirrors mounted on the floats, presumably to check for wheels up and
*-------------------------------------------------------------------------*Ivisuallywas just wondering where you got these. Can they be found at a local
Canadian Tire or some truck shop? I would like to do mine so I canconfirm each wheel up or down prior to landings.
list-server@dcsol.comYou have received this message because you have subscribed to the
murphy-rebel mailing list.
To unsubscribe from this list, send an e-mail to:
*-------------------------------------------------------------------------*with "unsubscribe murphy-rebel" in the body of the message.
For assistance contact mike.davis@dcsol.com
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*You have received this message because you have subscribed to the
murphy-rebel mailing list.
To unsubscribe from this list, send an e-mail to: list-server@dcsol.com
with "unsubscribe murphy-rebel" in the body of the message.
For assistance contact mike.davis@dcsol.com
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*You have received this message because you have subscribed to the
murphy-rebel mailing list.
To unsubscribe from this list, send an e-mail to: list-server@dcsol.com
with "unsubscribe murphy-rebel" in the body of the message.
For assistance contact mike.davis@dcsol.com
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
