Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] rivets

Converted from Wildcat! database. (read only)
Locked
jean.poirier

[rebel-builders] rivets

Post by jean.poirier » Sun Feb 19, 2012 11:52 am

Hello Ralf

There is a lot of difference between the "standard" Pop rivets and the Avex. I just use Avex. But Spanaur (an industrial distributor)
show "standard Pop" but also "multi-grip" Pop rivets. Very simular to Avex and very different of Standard Pop...

Jean
Rebel 747R

On Tue Feb 20 19:02 , 'Ralph Baker' <rebaker@sc.rr.com> sent:
Jean,
They are similar to women. Just because one may look like another you can bet they don't function the same. If you pull a pop rivet by itself
you will see the mandrel just pulls down inside the barrel, expanding it. If you pull an Avex you will see the barrel shortens first, expands
slightly and only then does the mandrel pull down inside the barrel. Pull a mandrel from each and you will see the pop mandrel is like a finishing
nail while the avex has a flat underside (like a mushroom). That is why the Avex shortens first and the pop doesn't.
The advantage is that the Avex expands to completely fill that carefully drilled hole and tends to pull the sheets tighter, the pop doesn't Pop
rivets are fine for building Porta Potties (take a look next time) but please use Avex for airplanes.
Regards,
Ralph Baker



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Jesse Jenks

[rebel-builders] rivets

Post by Jesse Jenks » Sun Feb 19, 2012 11:52 am

I have seen some in the hardware store that look EXACTLY like Avex. Not a
normal "Pop" rivet.

From: <jean.poirier@oxyportneuf.com>
Reply-To: <rebel-builders@dcsol.com>
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] rivets
Date: Tue, 20 Feb 2007 19:24:55 -0500

Hello Ralf

There is a lot of difference between the "standard" Pop rivets and the
Avex. I just use Avex. But Spanaur (an industrial distributor)
show "standard Pop" but also "multi-grip" Pop rivets. Very simular to Avex
and very different of Standard Pop...

Jean
Rebel 747R

On Tue Feb 20 19:02 , 'Ralph Baker' <rebaker@sc.rr.com> sent:
Jean,
They are similar to women. Just because one may look like another you
can bet they don't function the same. If you pull a pop rivet by itself
you will see the mandrel just pulls down inside the barrel, expanding it.
If you pull an Avex you will see the barrel shortens first, expands
slightly and only then does the mandrel pull down inside the barrel. Pull
a mandrel from each and you will see the pop mandrel is like a finishing
nail while the avex has a flat underside (like a mushroom). That is why
the Avex shortens first and the pop doesn't.
The advantage is that the Avex expands to completely fill that carefully
drilled hole and tends to pull the sheets tighter, the pop doesn't Pop
rivets are fine for building Porta Potties (take a look next time) but
please use Avex for airplanes.
Regards,
Ralph Baker



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


_________________________________________________________________
http://homepage.msn.com/zune?icid=hmetagline




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Curtis Langholz

[rebel-builders] rivets

Post by Curtis Langholz » Sun Feb 19, 2012 8:06 pm

Bob,
I have some extras. I was short a few so ordered 100 from ACS a while back.
Here is my email c120pilot@hotmail.com if you would like to contact me with your info.
Later,
Curtis
175R
From: rdhall@xplornet.com
To: rebel-builders@dcsol.com
Subject: [rebel-builders] rivets
Date: Sun, 10 Oct 2010 20:50:52 -0400

Hi; Iwonder if anyone out there would happen to have eight #5606 stainless rivets. I,ll gladly pay . It seems like too small an order for avdell. Thanks Bob



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Ted Waltman

[rebel-builders] Rivets

Post by Ted Waltman » Sun Feb 19, 2012 11:37 pm

Someone posted to the list in the last week or two the name of the Canadian
company (I seem to recall). Check the archives.

Aircraft Spruce (in Canada and U.S.) stocks them now.

Ted

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
TRU-FORM
Sent: Friday, January 20, 2012 12:10 PM
To: Rebel List
Subject: [rebel-builders] Rivets

Do we know where Murphy gets there rivets ie: Larger sizes 1613

Thanks

Kelly M. Ewing
Enjoy Your Day

(905)-877-9511 ( Office )




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username "rebel"
password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

TRU-FORM

[rebel-builders] Rivets

Post by TRU-FORM » Sun Feb 19, 2012 11:37 pm

I'll check thanks

Kelly M. Ewing
Enjoy Your Day

(905)-877-9511 ( Office )


On 2012-01-20, at 2:25 PM, "Ted Waltman" <ted@vafm.org> wrote:
Someone posted to the list in the last week or two the name of the Canadian
company (I seem to recall). Check the archives.

Aircraft Spruce (in Canada and U.S.) stocks them now.

Ted

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
TRU-FORM
Sent: Friday, January 20, 2012 12:10 PM
To: Rebel List
Subject: [rebel-builders] Rivets

Do we know where Murphy gets there rivets ie: Larger sizes 1613

Thanks

Kelly M. Ewing
Enjoy Your Day

(905)-877-9511 ( Office )




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username "rebel"
password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Jeff Micheal

[rebel-builders] Rivets

Post by Jeff Micheal » Sun Feb 19, 2012 11:37 pm

Mattic Industries..... they're on the web. Must contact for pricing and
placing order.
On 2012-01-20 11:19 AM, "TRU-FORM" <kelly@tru-form.ca> wrote:
Do we know where Murphy gets there rivets ie: Larger sizes 1613

Thanks

Kelly M. Ewing
Enjoy Your Day

(905)-877-9511 ( Office )




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

TRU-FORM

[rebel-builders] Rivets

Post by TRU-FORM » Sun Feb 19, 2012 11:37 pm

Thanks Jeff And Ted

Kelly M. Ewing
Enjoy Your Day

(905)-877-9511 ( Office )


On 2012-01-20, at 2:34 PM, Jeff Micheal <westcoastkitplanes@gmail.com> wrote:
Mattic Industries..... they're on the web. Must contact for pricing and
placing order.
On 2012-01-20 11:19 AM, "TRU-FORM" <kelly@tru-form.ca> wrote:
Do we know where Murphy gets there rivets ie: Larger sizes 1613

Thanks

Kelly M. Ewing
Enjoy Your Day

(905)-877-9511 ( Office )




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Locked