----- Original Message -----
From: "Ken" <klehman@albedo.net>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 14, 2011 5:17 PM
Subject: Re: [rebel-builders] Question of Rebel Datum location/ Cof G range
Impressive precision ;)
I just used one foot behind the hinge * 12 ft = 12 sq. ft.
One surprise question to me on the inspection was the deflection of all
the controls in each direction. He didn't care what the numbers were but
he needed to fill in all the blanks with something. Don't remember
whether he wanted degrees or inches of deflection.
Ken
On 2/14/2011 4:27 PM, Wayne G. O'Shea wrote:Jason..
Flaperons.. one complete flaperon SET..
11' 10".. (11' 11" if you have the gap between them sealed) x 17" = 2414
sq
in / 144 = 16.76 sq feet.
----- Original Message -----
From: "Rebecca Brownell"<brownell@cottagecountry.net>
To:<rebel-builders@dcsol.com>
Sent: Monday, February 14, 2011 11:44 AM
Subject: Re: [rebel-builders] Question of Rebel Datum location/ Cof G
range
Thats great Ken,Thanks.Here is one more.They ask for the area of one
flap.What is the proper way to measure that?
Thanks Jason
On 14-Feb-11, at 8:48 AM, Ken wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
