Jason,
There is a Chapter 12 dated 3/3/2006 that I'll email you. I can email
pictures of my assembly too if you would like me to.
Yes, the two push-pull tubes are indeed parallel to each other. That is
critical.
I'd have to measure the distance between the two FUS-65's on my plane, and I
won't be at the hangar for a few days. Maybe someone else can take that
measurement for you.
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jason
Beall
Sent: Sunday, November 14, 2010 4:14 PM
To: new list server
Subject: [rebel-builders] Super Rebel aileron torque tube (in roof)
dimensions
Greeting guys,
This is involved, so I will try to give details below.
I'll start with my question: Is the measurement between the CC-140 pivot
assemblies supposed to be the same as the measurement between the push-pull
tube holes on the flap horn (bellcrank)? See figure 25, Chapter 12 controls
of SR manual dated 29/11/02. The two push-pull tubes appear to be parallel
to each other in figure 25.
If I measure the distance between the holes that bolt the push-pull tubes
onto the flap horn (bellcrank) they are 6 inches apart, or 3 inches either
side of the fuselage centerline. Now, figures 22 ans 23 in the same chapter
show the center of the CC-140 pivot assembly as 1&9/16 inside of the flange
of the FUS-65 (see figure 21). THIS WOULD MAKE the distance between the two
push-pull tubes here as 4&7/8.
I am thinking that the dimension in Fig 22 & 23 should be 1 inch!?
Also, can someone please confirm that in figure 21 the two FUS-65s should be
8 inches apart, or 4 inches either side of the aircraft centerline.
Am I missing something here? Like a manual update!
Thanks in advance, -Jason
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions