request for repost: sealants

[Mike Davis]

Received: from Rebflyer@aol.com
by imo14.mx.aol.com (IMOv16.10) id ERWMa18748
for <murphy-rebel@dcsol.com>; Wed, 14 Oct 1998 22:01:43 +2000 (EDT)
From: Rebflyer@aol.com
Message-ID: <a395dbfc.36255787@aol.com>
Date: Wed, 14 Oct 1998 22:01:43 EDT
To: murphy-rebel@dcsol.com
Mime-Version: 1.0
Subject: Re: request for repost: sealants
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
X-Mailer: AOL 4.0 for Windows 95 sub 214

Hi Tim,
Stephan answered most of the questions I think. It is p/n 85165 and
We
just built two small brackets to hold the top and attached them to the heavy
plate that was designed to hole the mixer arm. Goes right in the original
cable hole and 1 inch of travel is great. It gave us 22 up and 9 down on
the
flaps. Good luck and keep at it, it's worth it!! Curt N97MR



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------