fus 11 side panels - when to rivet

[Roland Kriening]

Just finished making and preparing all parts for the forward section -
firewall, etc. I have looked through the plans and cannot find mention of
when to rivet fus 11 (side panels) to the cage uprights. The instructions
only mention drilling a top and bottom hole, which was done some time ago. I
would assume that the door hinge attaches here as well, but cant find any
mention of fus 11 in the door installation section.

Looking for help from those ahead of me in the build.

Roland
R56





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[mikeh]

On 9/22/2010 11:35 AM, kriening@rogers.com wrote to rebel-builders:
Hi Roland,
As the previous comments say, take your time. I've rivetted mine but
am leaving the firewall cleco'd for access to the panel.
I was hoping to use the same rivets for the fus 11 and the door hinge
but that wasn't possible so I have used flush rivets for the fus 11 in the
hinge area so the hinge can lie over the fus 11 rivets when I get there.
Sound as if we are fairly close together, I've just started to cleco
the cabin floor in place so it can be finally, irrevocably
rivetted............and hoping I haven't forgotten anything important.
Still with a few jobs to do in front of the carry throughs.
Cheers Mike 818R

->
-> Just finished making and preparing all parts for the forward section -
-> firewall, etc. I have looked through the plans and cannot find mention of
-> when to rivet fus 11 (side panels) to the cage uprights. The instructions
-> only mention drilling a top and bottom hole, which was done some time ago. I
-> would assume that the door hinge attaches here as well, but cant find any
-> mention of fus 11 in the door installation section.
->
-> Looking for help from those ahead of me in the build.
->
-> Roland
-> R56
->
->




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------