It seems funny you have cracks in the top area and not the bottom.
I personally do not like how the hing bracket is mounted. I would like to see a u shaped bracket that runs out to the edge and riveted on and also bolted on so the load is carried across the whole face of the mounting area.
That would never be mounted like that in the certified world.
Andrew E Burr XIV
Vertical performance LLc
Po Box 213
Cassville MO 65625
VPHelo, LLc has paid for the design and engineering for every component and holds ownership of all intellectual property for each component.
--- On Sun, 9/5/10, Alan Hepburn <g.alan.hepburn@gmail.com> wrote:
From: Alan Hepburn <g.alan.hepburn@gmail.com>
Subject: RE: [rebel-builders] ATTENTION Murphy Elite Operators: Inspection Update 1 For Cracks Found In Horizontal Stab
To: rebel-builders@dcsol.com
Date: Sunday, September 5, 2010, 1:04 PM
It's kind of interesting that the cracks seem to lead to the edge of the
washers, rather than to the bolt holes themselves.
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions