[rebel-builders] Float mount rigging caution - wrong turnbu

[Drew Dalgleish]

At 02:45 PM 24/05/2010 -0400, you wrote:

Before you get to the point that you are ready to mount your floats.....
please check your kits. Murphy shipped -22S forks and eyes with the -32
barrels and marked the bag AN130-32S turnbuckles for the kit I'm installing
here. -22's only have 2200 lb rating.. -32's have a 3200 and also the eye
ends aren't big enough for 5/32 thimbles! Better to find you have the right
or wrong ones now and can make arrangements before you have the airplane
hanging and can't finish the job. Luckily I have 6 sets of the proper sixe
on hand in my "just in case" stock !! ;O)

Wayne

Hi Wayne What # float kit are you working on. I seem to remember the
thimbles being very tight in my turnbuckle eyes.
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------