Anyone have two spare elevator horn bell cranks FUS-304 and two bearings MI-25. I am missing these parts from my kit. The figure in Chapter 9.2 step 45 shows the part but there are no dimensions. the part should be easy to make if I knew the thickness of the aluminum and the distance between the end holes. The bearing part should be able to be purchased.
If anyone can help with a part or a scale diagram posted to the archives or dimensions, from a part not yet installed, it would be most appreciated.
Reid
Yukon 013Y
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions