Hi Roland,
I seem to remember having plenty of material to trim off after
drilling. I drew a 5/16 line on one side and drilled through the skin, and
drilled through the other skin where it suited. I had a friend holding Fus
33 in place while I drilled just to make sure it was hard against the
bulkheads. Your skins must be in the right place if they fit on the
bulkheads so I'm wondering if your Fus 33 is the right size? Let me know if
you need and I'll measure mine.
Cheers Mike 818R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions