Hi Guys,
Question on the moose stabilizer hinge doubler. I just uploaded a picture
of the tip rib on my QB (2006) moose stab. In the manual, the part in
question is ST1008. In the manual, and in the service bulletin dated 11/04,
the part has 28 rivets in it. Mine only has twelve rivets and is about an
inch shorter than the one described in the manual and SB.
Also, there are 3 pictures in section SR-Moose (101) named:
stabmod1 - Official MAM Stab Hinge reinforce - 1
stabmod2 - Official MAM Stab Hinge reinforce - 2
stabmod3 - Official MAM Stab Hinge reinforce - 3
These pictures show an entirely different mod than what is in the SB and
what is on my stab.
So many options! ;-) What do you guys recommend?
Thanks,
Fred
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions