I took good notes Walter , and I control this
thank you
Bernard
On 11/13/2009 6:53 PM, walter.klatt@shaw.ca wrote to rebel-builders:
-> Bernard, another point about the cowl, if you go with the Murphy fiberglass
-> one. Get a 2.5 inch (instead of the standard 2.0 inch one) spacer on your
-> Sensenich prop. This will give more clearance on your inlets and help with
-> your cooling. And as has been said here many times before, be sure to
make
-> the exit area much larger, to avoid serious cooling problems on amphibs
with
-> this cowl. And if you can, make the inlets a little larger, too, top to
-> bottom of the two halves. Even 1 inch will make a big difference.
->
-> Walter
->
-> -----Original Message-----
-> From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
-> bernard.liagre@dcsol.com
-> Sent: November 13, 2009 4:04 PM
-> To: rebel-builders@dcsol.com
-> Subject: Re: [rebel-builders] RE:
-> =?ISO-8859-1?Q?Re=3A_=5Brebel=2Dbuilders=5D_He
->
-> thank you Walter
-> I'll listen to your experience, I confess that I do not know much and I want
-> to
-> do well.
-> I am very happy to be back with you on this site
-> Now it is 01 hours in France, I must sleep a little, but unfortunately for
-> you
-> tomorrow I'll have other issues
->
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions