[rebel-builders] Moose/SR tailwheel

[Wayne G. O'Shea]

I have a Scott 3400 and an SR tailwheel under the bench. I'll have a look
tomorrow night.... after I'm done Muskie fishing for the day..


----- Original Message -----
From: "Jason Beall" <super_rebel131@yahoo.com>
To: "new list server" <rebel-builders@dcsol.com>
Sent: Wednesday, October 28, 2009 11:14 PM
Subject: [rebel-builders] Moose/SR tailwheel

Guys,

Does anyone know if any other tailwheels are compatible with my Murphy SR?

In other words, are the two-bolt attach points on the Murphy produced
tailwheel the same spacing as, say, a Cessna 180-185 tailwheel

Thanks, -Jason






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Ted Waltman]

Part of the answer is in whether you have the hollow tube stinger with an
outside diameter of 1.0" or the newer solid stinger (more common to Cessna
for instance) that is 1.0625" in diameter (1 1/16").

Ted

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jason
Beall
Sent: Wednesday, October 28, 2009 9:15 PM
To: new list server
Subject: [rebel-builders] Moose/SR tailwheel

Guys,

Does anyone know if any other tailwheels are compatible with my Murphy SR?

In other words, are the two-bolt attach points on the Murphy produced
tailwheel the same spacing as, say, a Cessna 180-185 tailwheel

Thanks, -Jason






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

Jason... the SR tailwheel yoke I have in the shop is predrilled with a 1.25"
c/c on the two mounting bolts. The Scott 3400 tailwheel I have under the
table is the same! So order up one of those bushwheel tailwheels from Wup
and have at 'er !

Like has been cautioned though.. check your diameters. The AD modified 3400
tailwheel and stinger on a 185 is 1 1/8" diameter. The old ones were 1"
(like I have under the bench).

Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, October 28, 2009 11:18 PM
Subject: Re: [rebel-builders] Moose/SR tailwheel

I have a Scott 3400 and an SR tailwheel under the bench. I'll have a look
tomorrow night.... after I'm done Muskie fishing for the day..


----- Original Message -----
From: "Jason Beall" <super_rebel131@yahoo.com>
To: "new list server" <rebel-builders@dcsol.com>
Sent: Wednesday, October 28, 2009 11:14 PM
Subject: [rebel-builders] Moose/SR tailwheel

Guys,

Does anyone know if any other tailwheels are compatible with my Murphy
SR?

In other words, are the two-bolt attach points on the Murphy produced
tailwheel the same spacing as, say, a Cessna 180-185 tailwheel

Thanks, -Jason






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jason Beall]

I have both! -Jason

--- On Thu, 10/29/09, Ted Waltman <ted@vafm.org> wrote:

[quote]From: Ted Waltman <ted@vafm.org>
Subject: RE: [rebel-builders] Moose/SR tailwheel
To: rebel-builders@dcsol.com
Date: Thursday, October 29, 2009, 1:00 PM
Part of the answer is in whether you
have the hollow tube stinger with an
outside diameter of 1.0" or the newer solid stinger (more
common to Cessna
for instance) that is 1.0625" in diameter (1 1/16").

Ted

-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]
On Behalf Of Jason
Beall
Sent: Wednesday, October 28, 2009 9:15 PM
To: new list server
Subject: [rebel-builders] Moose/SR tailwheel

Guys,

Does anyone know if any other tailwheels are compatible
with my Murphy SR?

In other words, are the two-bolt attach points on the
Murphy produced
tailwheel the same spacing as, say, a Cessna 180-185
tailwheel

Thanks, -Jason

[Jason Beall]

Thanks Wayne and Ted. -Jason

--- On Thu, 10/29/09, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:

From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] Moose/SR tailwheel
To: rebel-builders@dcsol.com
Date: Thursday, October 29, 2009, 2:39 PM
Jason... the SR tailwheel yoke I have
in the shop is predrilled with a 1.25"
c/c on the two mounting bolts. The Scott 3400 tailwheel I
have under the
table is the same! So order up one of those bushwheel
tailwheels from Wup
and have at 'er !

Like has been cautioned though.. check your diameters. The
AD modified 3400
tailwheel and stinger on a 185 is 1 1/8" diameter. The old
ones were 1"
(like I have under the bench).

Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, October 28, 2009 11:18 PM
Subject: Re: [rebel-builders] Moose/SR tailwheel

I have a Scott 3400 and an SR tailwheel under the

bench. I'll have a look

tomorrow night.... after I'm done Muskie fishing for

the day..

----- Original Message -----
From: "Jason Beall" <super_rebel131@yahoo.com>
To: "new list server" <rebel-builders@dcsol.com>
Sent: Wednesday, October 28, 2009 11:14 PM
Subject: [rebel-builders] Moose/SR tailwheel

Guys,

Does anyone know if any other tailwheels are

compatible with my Murphy

SR?

In other words, are the two-bolt attach points on

the Murphy produced

tailwheel the same spacing as, say, a Cessna

180-185 tailwheel

Thanks, -Jason

-----------------------------------------------------------------

List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------
-----------------------------------------------------------------

List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jeff Micheal]

Wayne / Jason,

The tail wheel swivel (yoke) that you have Wayne w/ 1.25" c/c sounds like
its for the Elite and/or the earlier SR2500. If I recall correctly the tail
wheel swivel for the SR3500/Yukon has a mounting spacing (two bolts to
stinger) of about 2" and designed heavier.

Like always, check parts to see if any changes or updates have been done
over the years.

Cheers,
Jeff


On Fri, Oct 30, 2009 at 8:44 AM, Jason Beall <super_rebel131@yahoo.com>wrote:

I have both! -Jason

--- On Thu, 10/29/09, Ted Waltman <ted@vafm.org> wrote:

From: Ted Waltman <ted@vafm.org>
Subject: RE: [rebel-builders] Moose/SR tailwheel
To: rebel-builders@dcsol.com
Date: Thursday, October 29, 2009, 1:00 PM
Part of the answer is in whether you
have the hollow tube stinger with an
outside diameter of 1.0" or the newer solid stinger (more
common to Cessna
for instance) that is 1.0625" in diameter (1 1/16").

Ted

-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]
On Behalf Of Jason
Beall
Sent: Wednesday, October 28, 2009 9:15 PM
To: new list server
Subject: [rebel-builders] Moose/SR tailwheel

Guys,

Does anyone know if any other tailwheels are compatible
with my Murphy SR?

In other words, are the two-bolt attach points on the
Murphy produced
tailwheel the same spacing as, say, a Cessna 180-185
tailwheel

Thanks, -Jason






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

Yes Jeff.. the one I have here is from an earlier SR..

----- Original Message -----
From: "Jeff Micheal" <westcoastkitplanes@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, October 30, 2009 1:59 PM
Subject: Re: [rebel-builders] Moose/SR tailwheel

Wayne / Jason,

The tail wheel swivel (yoke) that you have Wayne w/ 1.25" c/c sounds like
its for the Elite and/or the earlier SR2500. If I recall correctly the
tail
wheel swivel for the SR3500/Yukon has a mounting spacing (two bolts to
stinger) of about 2" and designed heavier.

Like always, check parts to see if any changes or updates have been done
over the years.

Cheers,
Jeff


On Fri, Oct 30, 2009 at 8:44 AM, Jason Beall
<super_rebel131@yahoo.com>wrote:

I have both! -Jason

--- On Thu, 10/29/09, Ted Waltman <ted@vafm.org> wrote:

From: Ted Waltman <ted@vafm.org>
Subject: RE: [rebel-builders] Moose/SR tailwheel
To: rebel-builders@dcsol.com
Date: Thursday, October 29, 2009, 1:00 PM
Part of the answer is in whether you
have the hollow tube stinger with an
outside diameter of 1.0" or the newer solid stinger (more
common to Cessna
for instance) that is 1.0625" in diameter (1 1/16").

Ted

-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]
On Behalf Of Jason
Beall
Sent: Wednesday, October 28, 2009 9:15 PM
To: new list server
Subject: [rebel-builders] Moose/SR tailwheel

Guys,

Does anyone know if any other tailwheels are compatible
with my Murphy SR?

In other words, are the two-bolt attach points on the
Murphy produced
tailwheel the same spacing as, say, a Cessna 180-185
tailwheel

Thanks, -Jason






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------