To fasten my wing tips, I plan to use #6 truss head machine screws into
single hole Click Bond nutplates. The manual calls for fastener spacing
between "every other tib rib rivet" when using 0410 rivets, which puts the
rivets approx. 2-7/16" apart. When laying that out, that high fastener
density looks like major overkill. I'd prefer spacing the screws between
every third tip rib rivet instead, increasing the spacing to roughly every 4
inches.
Is it really necessary to have screws every 2-7/16" or will 4" spacing
suffice?
Ron
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions