[rebel-builders] Horizontal Stabs

[Ken]

Dave
The strut takes the load.
Installing two bolts will actually weaken the structure, promote fatigue
cracking, etc. The bulkhead strength is for one bolt only. Highly
recommend you follow the manual for this.
Ken

David L. Tuck wrote:

I'm a drilling the forward attach fitting to the bulkhead and the manual shows only one attach bolt. I don't want to fold my horizontal stabs, so can I install two bolts in the forward fitting? or is it really needed?
Thanks
Dave rebel#009
_

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Ron Shannon]

Dave,

The forward stabilizer attach bracket is a good location for Click Bond
nutplates. One hole instead of three required by regular nutplates. Contact
(http://theflightshop.com) for whatever sizes you need.

Ron

On Sat, Oct 18, 2008 at 4:58 PM, Ken <klehman@albedo.net> wrote:

Dave
The strut takes the load.
Installing two bolts will actually weaken the structure, promote fatigue
cracking, etc. The bulkhead strength is for one bolt only. Highly
recommend you follow the manual for this.
Ken

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

ABSOLUTELY NOT !

Becomes a cantilever beam and it's not designed for that. Bad place for MAM
to put a tooling hole......

----- Original Message -----
From: "David L. Tuck" <dltuck53@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, October 18, 2008 6:38 PM
Subject: [rebel-builders] Horizontal Stabs

I'm a drilling the forward attach fitting to the bulkhead and the manual
shows only one attach bolt. I don't want to fold my horizontal stabs, so
can I install two bolts in the forward fitting? or is it really needed?
Thanks
Dave rebel#009
_________________________________________________________________
Want to read Hotmail messages in Outlook? The Wordsmiths show you how.
http://windowslive.com/connect/post/wed ... ail_092008



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------