Anyone come up with a neat, easy (or not so easy) way to cut narrow slots in
the metal? I'm cutting the holes for the strut attaches, ST-39, (starting
to know some part numbers now) in the bottom of the elevator and the opening
is smaller than my nibbler and too small for my snips. I experimented with
a chisel but didn't like the way it treated the edges. My best guess is
chain drill and file.
Zero degrees and windy; a good day to be inside working on R207. Thanks,
Craig
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions