caliper interference / over size tires

[Ralph Baker]

We have the MAM supplied upsized tires on our Elite. They are Airhawk 800-6 and are inflated to 24 pounds. The left one has about 3/16" clearance to the caliper while the right interferes by about 1/4". It rubs on the sidewall about 1/2 - 5/8" out from the rim. I have emailed MAM for suggestions but with the reported slow response decided to tap this large knowlege base as well. Any ideas?

I thought perhaps turning the tire around on the rim. Maybe the profile is enough different on the opposite side to allow clearance. Any opinions as to what a minimum clearance should be?
Thanks,
Ralph Baker



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------