I have a Sensenich 76 x 56 on my Elite Amphiib I have
found a 78 x 47 Mcauley Borer prop I would like to try
out problem is the bolt hole size on the Mcauley is
3/8 and the engine is set ip for 1/2 inch. Can anybody
tell me if I can machine out the 3/8 to 1/2 to mount
the prop without compromising the same?
Thanks
John W 752 E
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62s ... o8Wcj9tAcJ
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions