Converted from Wildcat! database. (read only)
-
Ken
Post
by Ken » Sun Feb 19, 2012 4:17 pm
Dieter
I can't think of any reason it would matter which way the stringers
pointed. Hope they are on the interior side of the skin though...
Ken
Dieter Oberbichler wrote:
hello list !
Another error in a series of so many, and I can't blame the manual...
I just noticed that my stringers on the bottom wing are either on the outside ;-( or facing in the wrong direction. I assume that external stringers are not an option, but what about the orientation ? Does it matter it these two stringers face forward with their open end? I really hope it doesn't !
I didn't find anything in the archives about it, maybe someone out there knows how important the orientation is.
Thank you Wayne for the tip with the file for deburring the stringers, that saved me a lot of time!
BTW, I use plastic containers we normally used for submitting cattle brain samples to the state-lab for "mad cow disease testing" for my epoxy primer ....who can beat this :-))
thanks
Dieter
Rebel 778R
many more rivets to pull.....
http://www.mykitlog.com/oberbichler
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
-
Dieter Oberbichler
Post
by Dieter Oberbichler » Sun Feb 19, 2012 4:17 pm
Thank you Ken, that was the answer I was looking for!
Dieter
778R
----- Original Message -----
From: "Ken" <
klehman@albedo.net>
To: <
rebel-builders@dcsol.com>
Sent: Monday, January 07, 2008 6:11 AM
Subject: Re: [rebel-builders] stringer orientation
Dieter
I can't think of any reason it would matter which way the stringers
pointed. Hope they are on the interior side of the skin though...
Ken
Dieter Oberbichler wrote:
hello list !
Another error in a series of so many, and I can't blame the manual...
I just noticed that my stringers on the bottom wing are either on the
outside ;-( or facing in the wrong direction. I assume that external
stringers are not an option, but what about the orientation ? Does it
matter it these two stringers face forward with their open end? I really
hope it doesn't !
I didn't find anything in the archives about it, maybe someone out there
knows how important the orientation is.
Thank you Wayne for the tip with the file for deburring the stringers,
that saved me a lot of time!
BTW, I use plastic containers we normally used for submitting cattle
brain samples to the state-lab for "mad cow disease testing" for my
epoxy primer ....who can beat this :-))
thanks
Dieter
Rebel 778R
many more rivets to pull.....
http://www.mykitlog.com/oberbichler
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
-
Drew Dalgleish
Post
by Drew Dalgleish » Sun Feb 19, 2012 4:17 pm
Hi Dieter I don't think it matters either but if you used that skin for
your second wing they'd be facing the right way.
At 11:27 PM 1/7/2008 +0100, you wrote:
Thank you Ken, that was the answer I was looking for!
Dieter
778R
----- Original Message -----
From: "Ken" <
klehman@albedo.net>
To: <
rebel-builders@dcsol.com>
Sent: Monday, January 07, 2008 6:11 AM
Subject: Re: [rebel-builders] stringer orientation
Dieter
I can't think of any reason it would matter which way the stringers
pointed. Hope they are on the interior side of the skin though...
Ken
Dieter Oberbichler wrote:
hello list !
Another error in a series of so many, and I can't blame the manual...
I just noticed that my stringers on the bottom wing are either on the
outside ;-( or facing in the wrong direction. I assume that external
stringers are not an option, but what about the orientation ? Does it
matter it these two stringers face forward with their open end? I really
hope it doesn't !
I didn't find anything in the archives about it, maybe someone out there
knows how important the orientation is.
Thank you Wayne for the tip with the file for deburring the stringers,
that saved me a lot of time!
BTW, I use plastic containers we normally used for submitting cattle
brain samples to the state-lab for "mad cow disease testing" for my
epoxy primer ....who can beat this :-))
thanks
Dieter
Rebel 778R
many more rivets to pull.....
http://www.mykitlog.com/oberbichler
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
Drew
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
-
Ken
Post
by Ken » Sun Feb 19, 2012 4:21 pm
Don't think you can swap sides as the rivet spacing is different on the
inboard and outboard ends of the skin.
Ken
Drew Dalgleish wrote:
Hi Dieter I don't think it matters either but if you used that skin for
your second wing they'd be facing the right way.
At 11:27 PM 1/7/2008 +0100, you wrote:
Thank you Ken, that was the answer I was looking for!
Dieter
778R
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
-
Drew Dalgleish
Post
by Drew Dalgleish » Sun Feb 19, 2012 4:21 pm
Opps My bad For some reason I was thinking that the rivet spacing was only
different on the leading edge skin.
At 10:39 PM 1/7/2008 -0800, you wrote:
Don't think you can swap sides as the rivet spacing is different on the
inboard and outboard ends of the skin.
Ken
Drew Dalgleish wrote:
Hi Dieter I don't think it matters either but if you used that skin for
your second wing they'd be facing the right way.
At 11:27 PM 1/7/2008 +0100, you wrote:
Thank you Ken, that was the answer I was looking for!
Dieter
778R
Drew
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
-
d.oberbichler
Post
by d.oberbichler » Sun Feb 19, 2012 4:21 pm
Dr.Dieter Oberbichler
Tier