[rebel-builders] Dynafocal rubber mounts

[Eric Fogelin]

Hello Walter.

I ordered the 94150-40 engine mounts from Aircraft Spruce. Older Murphy
documents listed these as Lord mounts, but they are Barry Mounts (different,
but apparently a reputable company). They fit fine on my Murphy Dynafocal
mount.

I found it confusing ordering mounts. Some require ordering eight mounts for
a complete set, others require only 4. For part 94150-40 you only need order
4 for a complete set. Perhaps that will make the cost look better. Aircraft
Spruce currently lists these at US$56.50. So you will need to order 4 at a
total of US$226.

Hope that helps.

Eric
645E

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Walter
Klatt
Sent: Tuesday, October 23, 2007 2:48 PM
To: Rebel-Builders
Subject: [rebel-builders] Dynafocal rubber mounts

I am going to have to order some rubber mounts for the dynafocal mount. But
if anyone has any extras that they can't use for some reason, let me know,
and I might buy them off you.



Anyway, I know I can buy part no. 94150-40 from Aircraft Spruce. I just want
to confirm from someone here too that these are the right ones. Are there
any other better sources for these, and/or perhaps a better quality mount
that you know of that will work with the Murphy dynafocal mount.



Walter





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[John W]

Hey Walter
I had an issue with my Elite mounts and tracked down
Paul Snyder at Lord Mounts he is the best source of
info
I have found on mounts. He is a great guy.
e mail paul.snyder@lord.com
or ph 814-868-5424 x 6611
Good luck John W
--- Eric Fogelin <elist@whidbey.com> wrote:

Hello Walter.

I ordered the 94150-40 engine mounts from Aircraft
Spruce. Older Murphy
documents listed these as Lord mounts, but they are
Barry Mounts (different,
but apparently a reputable company). They fit fine
on my Murphy Dynafocal
mount.

I found it confusing ordering mounts. Some require
ordering eight mounts for
a complete set, others require only 4. For part
94150-40 you only need order
4 for a complete set. Perhaps that will make the
cost look better. Aircraft
Spruce currently lists these at US$56.50. So you
will need to order 4 at a
total of US$226.

Hope that helps.

Eric
645E

-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com] On Behalf Of Walter
Klatt
Sent: Tuesday, October 23, 2007 2:48 PM
To: Rebel-Builders
Subject: [rebel-builders] Dynafocal rubber mounts

I am going to have to order some rubber mounts for
the dynafocal mount. But
if anyone has any extras that they can't use for
some reason, let me know,
and I might buy them off you.



Anyway, I know I can buy part no. 94150-40 from
Aircraft Spruce. I just want
to confirm from someone here too that these are the
right ones. Are there
any other better sources for these, and/or perhaps a
better quality mount
that you know of that will work with the Murphy
dynafocal mount.



Walter

-----------------------------------------------------------------

List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------
-----------------------------------------------------------------

List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------


__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------