Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] Stall Warning

Converted from Wildcat! database. (read only)
Locked
Ted Waltman

[rebel-builders] Stall Warning

Post by Ted Waltman » Sun Feb 19, 2012 12:16 pm

I don't have one installed Steve. The stall is very benign--as long as you
keep the ball reasonably centered it just mushes--no dramatic wing drop or
such.

Ted

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
steveh@dcsol.com
Sent: Monday, August 06, 2007 9:25 AM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Stall Warning

Has anyone install a stall warning in their Moose or Rebel? ? ?? ?

Is one needed?? ?? ??

If you installed one, what type?? ??

Looking back in the arcrives could not find much on the subject.

Thanks for you input.

Steve H
Moose213



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Robert Johnson

[rebel-builders] Stall Warning

Post by Robert Johnson » Sun Feb 19, 2012 12:16 pm

Hi Steve: As far as the Rebel goes, the stall is such a non-event and at a
very low airspeed, a warning system is not required. You would really have
to be asleep to let it happen un-noticed. I think the Moose is the same way,
but I am sure a Moose pilot will comment here soon. That is what is so nice
about the Murphy aircraft - terrific flying characteristics. Bob J
----- Original Message -----
From: <steveh@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, August 06, 2007 11:25 AM
Subject: [rebel-builders] Stall Warning

Has anyone install a stall warning in their Moose or Rebel? ? ?? ?

Is one needed?? ?? ??

If you installed one, what type?? ??

Looking back in the arcrives could not find much on the subject.

Thanks for you input.

Steve H
Moose213



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Rick Harper

[rebel-builders] Stall Warning

Post by Rick Harper » Sun Feb 19, 2012 12:16 pm

G'day from OZ, Steve !

I'm going with Ted & Rob ..... forget the stall warning !

(I made & calibrated my own - and although it worked 100% OK .... I never really used it - so OFF it came :o)

Get yourself up HIGH & do lots of practise & learn to FEEL the plane as it approaches the stall ....... you'll find it just gets a "mushy feeling" & starts to get a high sink rate ...... just drop the nose a tad , or feed in a TOUCH of power & all is back to normal ! :o)

Rick "Biggus" Harper
541R
----- Original Message -----
From: Ted Waltman
To: rebel-builders@dcsol.com
Sent: Tuesday, August 07, 2007 12:55 AM
Subject: RE: [rebel-builders] Stall Warning


I don't have one installed Steve. The stall is very benign--as long as you
keep the ball reasonably centered it just mushes--no dramatic wing drop or
such.

Ted

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
steveh@dcsol.com
Sent: Monday, August 06, 2007 9:25 AM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Stall Warning

Has anyone install a stall warning in their Moose or Rebel? ? ?? ?

Is one needed?? ?? ??

If you installed one, what type?? ??

Looking back in the arcrives could not find much on the subject.

Thanks for you input.

Steve H
Moose213



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Steve Halvorsen

[rebel-builders] Stall Warning

Post by Steve Halvorsen » Sun Feb 19, 2012 12:16 pm

Thanks for the input. We're going to save some time and $$$ and NOT install a "stall warning" system into our Moose.
Trying to stop putting in all these extra's and get the thing finished so we can go flying.

Thanks again

Steve H
Moose213


----- Original Message ----
From: "steveh@dcsol.com" <steveh@dcsol.com>
To: rebel-builders@dcsol.com
Sent: Monday, August 6, 2007 10:25:09 AM
Subject: [rebel-builders] Stall Warning


Has anyone install a stall warning in their Moose or Rebel? ? ?? ?

Is one needed?? ?? ??

If you installed one, what type?? ??

Looking back in the arcrives could not find much on the subject.

Thanks for you input.

Steve H
Moose213



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Locked