it off the original filter location to line up with the cowl hole. Lined
edges of the addition with silcon baffle seal. Sent you a couple pics
direct.
Wayne
----- Original Message -----
From: "steve whitenect" <srwhitenect@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, February 27, 2007 10:42 PM
Subject: [rebel-builders] Re: Elite 0-360 Carb Intake
Helping a buddy with his windshield on his Elite. He has a Superior 0-360
180 hp and a high speed cowl. The airbox supplied with the firewall kit,
when mounted to the carb, is offset about 1 1/2" to the port side of the
inlet hole. Anyone else experience this and what did you do for a good fit
other than re-work the front of the airbox? Thanks to those that respond.
Steve W 637R
_________________________________________________________________
Buy what you want when you want it on Sympatico / MSN Shopping
http://shopping.sympatico.msn.ca/conten ... ata=081805
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
