Hello
1- On Fus-3 between the 2 Gusset # fus-1, the manual ask to drill #30 for rivets. How do you debur inside the tube?
2- Because the top (fus-23), is in sandwich between the gussets (fus-1) and the tube (fus-3), the gussets are not 100% mating with the
tube, the top flange is "too short". I hope you understand, I do not know how to clear on that in english....
3- Manual ask for dimple the top on the fuselage root ribs (fus-27), do I have to dimple in the angle (fus-35) or not?
Thanks
Jean
Rebel 747R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions