Hello Richard
I will answer what I know... and let the balance to others!
1- You can order a second FUS-30 from MAM and use as the doubler (will have
to be trim). Note that the FUS-30 from MAM is now .032" but I think it was
thinner before... When I ordered my kit, I ordered a second fus-30. If you
work from a sheet of .032", it is probably easier to visit a sheet metal
shop and asked them to bend it for you...
2- The riveter is ok but some builder have round a bit the nose to have a
better finish (it will not work after for the flush rivets).
Jean
Rebel 747R
Jean Poirier
Pr
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions